{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Heavy duty malleable cast iron screw clamp TKPN-BE 600/120
Article no.: TKPN60BE
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| Type of product | Clamp |
Identification & Classification
| Article number | TKPN60BE | |
| EAN / GTIN | 4008158015378 | |
| Manufacturer number | TKPN60BE | |
| L-Number | L80030 296 | |
| Manufacturer/responsible person | BESSEY Tool GmbH & Co. KG, Muehlenwieserstraße 40, 74321 BIETIGHEIM-BISSINGEN, Germany, www.bessey.de |
Description
Description:
- Clamping force up to 6,500 N
- Strengthened design for higher clamping force and wider opening widths
- Ergonomically shaped wood handle
- Stable profiled rail with serration
Feature:
- Overhead: 120 mm
- Material / surface:
- Upper and lower parts made of reinforced malleable cast iron, powder coated
- Hollow profile rail made of steel, cold drawn, galvanized
- Spindle with trapezoidal thread made of steel rolled, burnished
- Wooden handle, water-based lacquer
- Pressure plate made of steel, cold pressed, galvanized
- Rail: 35x11 mm
- Wingspan: 600 mm
Application:
- Interior fittings
- Shell construction
- Furniture and joinery works
- Kitchen construction and shop fitting
- Carpentry and woodwork
- Powerful and rigid clamping
Note:
- Danger warnings:
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Care instructions:
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean the fluting on the rails with a steel brush
- Clean and oil the spindle regularly
- If the lower part slips, turn the grub screw a 1/4 turn further (TG, KRE, KREV only)
- Clean and oil the pressure plate regularly