{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Telescopic drywall support ST 2900
Article no.: ST290
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| Type of product | Ceiling support / assembly support |
Identification & Classification
| Article number | ST290 | |
| EAN / GTIN | 4008158031583 | |
| Manufacturer number | ST290 | |
| L-Number | L80030 313 | |
| Manufacturer/responsible person | BESSEY Tool GmbH & Co. KG, Muehlenwieserstraße 40, 74321 BIETIGHEIM-BISSINGEN, Germany, www.bessey.de |
Description
Description:
- Resilient up to a maximum of 150 kg when the telescopic rod is fully retracted
- Stable construction due to special steel pipes and anti-slip PVC contact surfaces (8,5 x 6,5 cm)
- Application also on slopes due to continuously swivelable contact surfaces of -45° to +45°
- Easy, safe handling due to a telescoping and locking inner pipe as well as an outer pipe that can be turned by the foam grip
- GS-certified for quality and safety
Feature:
- Load limit at max. Pull-out length: 50 kg
- Load limit at min. Pull-out length: 150 kg
- Material / surface:
- Upper and lower part made of reinforced PA6 plastic
- Steel tube, coated
- Lever made of reinforced PA6 plastic
- Plastic protective caps
- Travel: 1600-2900 mm
Advantage:
Secure hold
- Resilient and anti-slip, the support guarantees secure holding, even on sensitive surfaces:
- due to special steel pipes ensures a max load of 150 kg can be applied (dependent upon the size of support and length applied)
- due to additional locking of the release button
- due to rubber PVC contact surfaces top and bottom
- The support can be used quickly:
- due to the fixing in just two steps: The rough pre-setting is carried out using the telescoping and quickly locking inner pipe
- due to additional locking of the release button
- due to special steel pipes ensures a max load of 150 kg can be applied (dependent upon the size of support and length applied)
Application:
- Interior fittings
- Shell construction
- DIY
- Staircase construction
- Dry construction
- Carpentry and woodwork
- Fixes and supports during dry construction
- Single-worker assembly
Note:
- Danger warnings:
- Read and observe the operating instructions.
- The specified load limits must not be exceeded.
- You may only use the telescopic drywall support on level and clean surfaces.
- You must not apply lateral loads to the telescopic drywall support.
- The telescopic drywall support may only be tensioned by hand without additional aids.
- You may only use original spare parts.
- Protect yourself with safety goggles and a safety helmet.
- Care instructions:
- Clean the rails with solvent
- Clean and oil the spindle regularly