{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
KombiKlamp SG-VAD 300/120
Article no.: SG30VAD
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| Type of product | Clamp |
Identification & Classification
| Article number | SG30VAD | |
| EAN / GTIN | 4008158032368 | |
| Manufacturer number | SG30VAD | |
| L-Number | L80070 101 | |
| Manufacturer/responsible person | BESSEY Tool GmbH & Co. KG, Muehlenwieserstraße 40, 74321 BIETIGHEIM-BISSINGEN, Germany, www.bessey.de |
Description
Description:
- Clamping force up to 7,500 N
- Clamping and spreading of round, oval and angled workpieces
- Pressure plates can be replaced with no need for tools
Feature:
- Overhead: 120 mm
- Material / surface:
- Fixed and sliding bracket made of tempered steel, galvanized
- Spindle with trapezoidal thread made of steel rolled and tempered, phosphated
- Steel toggle, galvanized
- Pressure plate made of steel, phosphated
- Rail: 30x15 mm
- Wingspan: 300 mm
Advantage:
Multi‐angle pad
- The multi‐angle pad is especially adapted to round, oval and angled workpieces – from 60° inside to 60° outside. For perfectly flat clamping remove the multi‐angle pad. For spreading it is easy to reverse the position of the pad on the anvil of the clamp. Its like having 3 clamps in one.
- The end stop can be removed – to allow the sliding arm to be quickly turned around for spreading.
- For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.
- The addition of the plastic BESSEY grip means that clamping can also be very comfortable. The stable tommy bar has a plastic pad to ensure that it is easy to grip with your hand. This allows powerful, controlled clamping.
Application:
- Metal construction
- Locksmith work
Note:
- Danger warnings:
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Care instructions:
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean and oil the spindle regularly
- If the rail is shiny, roughen both narrow sides with emery cloth (100 grain)
- Clean and oil the pressure plate regularly