{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Ball bearing extractor set in KUKKO L-BOXX®, Type: K70C
Article no.: 883000 K70C
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Product details
Technical Data
| Type of product | Ball bearing extractor |
Identification & Classification
| Article number | 883000 K70C | |
| EAN / GTIN | 4021176019999 | |
| Manufacturer number | K-70-C | |
| Manufacturer/responsible person | Kleinbongartz & Kaiser oHG, Heinrich-Hertz-Straße 5, 40704 HILDEN, Germany, www.kukko.com |
Description
Version:
Extractor set in KUKKO L-BOXX® size 136, consisting of one base body with spindle (120 mm long) and 3 each narrow and wide extractor hooks (each 70 mm long) and one base body with spindle (240 mm long) and 4 each narrow and wide extractor hooks (each 156 mm long).
Description:
The “PULLPO” K-70-C 38-piece ball bearing puller set is used by manual trades, industry and workshops for entirely non-destructive removal of deep groove ball bearings without dismantling the shaft. Even if no supporting surface is available, the PULLPO can safely remove bearings that would otherwise be impossible to grip, thus ensuring that the affected parts can be reused. The PULLPO not only impresses with its innovative design, but also with its ease of use, and the specially developed pulling hooks provide a reliable hold during the removal process and enable higher removal forces. In addition to the PULLPO, the set also includes suitable hooks and rings to ensure proper use.
Application:
For non-destructive extraction of grooved ball bearings from a housing on a shaft by gripping them between inner and outer ball races.
Suitable for:
Ball bearings to ISO: 6000 − 6020; 6200 − 6212; 6300 − 6311; 6403 − 6408
Content:
1 set of extractor hooks, 3 pieces, 150 mm long(for ball bearings 6000, 6001, 6002, 6003, 6200). 1 set of extractor hooks 3-piece 150 mm long(for ball bearings 6004, 6005, 6201, 6202, 6203, 6300). 1 set of extractor hooks 3-piece 170 mm long(for ball bearings 6204, 6205, 6301, 6302, 6303). 1 set of extractor hooks 4-piece 180 mm long(for ball bearings 6007, 6008, 6009, 6010, 6013). 1 set of extractor hooks 4-piece 180 mm long(for ball bearings 6011, 6012, 6206, 6207, 6304, 6305, 6306). 1 set of extractor hooks 4-piece 217 mm long(for ball bearings 6208, 6209, 6210, 6307, 6403, 6407). 1 set of extractor hooks 4-piece 217 mm long(for ball bearings 6211, 6212, 6308, 6309, 6310, 6311, 6404, 6405, 6406, 6408).
Spare part:
The numbers marked with # refer to the original KUKKO numbers. If you have any questions, please do not hesitate to contact us.
- Mechanical pressure spindle ⌀10 mm #61 01 20
- Mechanical pressure spindle ⌀14 mm #61 42 42
- Ring set #70-01-R
- Cross-beam #70-01-T
- 3 spare hooks (set) for 70-1, narrow #70-011
- 3 spare hooks (set) for 70-1, wide #70-012
- Ring set #70-02-R
- Cross-beam set #70-02-T
- 3 spare hooks (set) for 70-2, narrow #70-021
- Pulling hook set for ball bearings #70-021-S
- 3 spare hooks (set) for 70-2, wide #70-022
- Pressure pieces (sets) for 70-01 #70 01 17
- Pressure pieces (sets) for 70-02 #70 02 17