{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Contour measuring instrument, Type: CM1-Y
Article no.: 499250 CM1-Y
Article code:
Product details
Technical Data
| Measuring range X | 190 mm | |
| Measuring range Z | 275 mm | |
| Measuring range Y | 40 mm | |
| Control in X and Z | CNC | |
| Control in Y | CNC | |
| Measuring system X, Z and T | High-accuracy, incremental, non-contact | |
| Resolution in Z in relation to the contact point | 0.05 µm | |
| Resolution in Z in relation to the measurement system | 0.05 µm | |
| Straightness | ± (2+L/50) µm | |
| Measuring accuracy XZT axis combined | ± (2+L/50) µm | |
| Footprint length | 645 mm | |
| Baseplate depth | 380 mm | |
| Height | 550 mm | |
| maximum component weight | 100 kg | |
| Weight | 40 kg | |
| Power supply | Mains operated | |
| Type of product | Contour measuring tool |
Identification & Classification
| Article number | 499250 CM1-Y | |
| Manufacturer number | 499250 CM1-Y | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Simple contour measuring instrument with non-contact, optically incremental measuring system. Solid granite base and high-precision axes with wear resistant sliding bearings. CNC-controlled X and Z-axes (either by keyboard or optionally by joystick).
Measurement functions:
Measurement functions:
- Set the measured section and measurement rate.
- Programming automatic procedures by Teach-In.
- Simple selection of regression lines and circles.
- Create free and dependent intersections.
- Create auxiliary lines, auxiliary circles and reference spheres.
- Rotate contours and mirror contours.
- Determine the shape and position.
CNC-controlled Y-table for automatic searching for the highest and lowest points in the Y-direction. Recommended for top-down measurement.
Supplied with:
Supplied with measurement computer, monitor, mouse and keyboard, calibration standard, contact point mounting, contact point 20.5 mm.
Optional extras:
Top-Down software option with calibration standard No. 499257.
Note:
We reserve the right to make technical changes and to change the version of the PC and monitor.