{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
PFERD TOOLS COMBIDISC pressed non-woven disc CDR PNER dia. 75 mm medium-hard A coarse for finishing
Article no.: 4007220496411
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Identification & Classification
| Article number | 4007220496411 | |
| EAN / GTIN | 4007220496411 | |
| Manufacturer number | 47700207 | |
| L-Number | L51700 101449 | |
| Manufacturer/responsible person | August Rueggeberg GmbH & Co. KG, Hauptstraße 13, 51709 MARIENHEIDE, Germany, www.pferd.com |
Description
Version:
- MH (medium hard)
Description:
- For achieving a very fine, homogeneous sanding pattern, which is sufficient for preparing the high-gloss polish, depending on the requirements.
- Particularly suitable for processing small and medium-sized surfaces on stainless steel (INOX) components.
- The CDR clamping system has a screw connection with external thread (plastic) on the tool side.
- Also suitable for the systems used on the market: Roloc™, Lockit, Speed Lok TR, Power Lock Type III, Fastlock System B, Roll-On.
- PFERD TOOLS-ERGONOMICS recommends COMBIDISC as an innovative tool solution to sustainably reduce the vibration, noise and dust generated during use and to improve working comfort. PFERD TOOLS-EFFICIENCY recommends COMBIDISC tools to reduce tool change and set-up times.
Feature:
- Clamping system: CDR system
- Max. RPM: 12500 RPM
- RPM, opt: 6400 RPM
- Design: MH (medium hard)
- Width metric: 6 mm
- Abrasive: Aluminium oxide A
- ø outer metric: 75 mm
- Grit size: G (coarse)
Advantage:
- Highly economical due to quick tool change.
- High level of comfort thanks to easy handling and low-vibration work.
- No malfunctions during use due to sticking, slipping or loosening.
Application:
- Recommendations for use: Use COMBIDISC non-woven discs with sanding sheet holder on flexible shaft drives with angle handpiece, small pneumatic or electric angle grinders. Use a suitable grinding oil for the material to significantly increase the service life and grinding performance of the tools.
- Machining tasks: Cleaning; deburring; fine grinding in stages; roughening; structuring (matting, line matting and satin finishing); surface processing; weld seam processing
- Drive types: Angle grinder; cordless angle grinder; flexible shaft drive; straight grinder
Material:
- Machinable materials:
- Aluminium
- brass
- bronze
- Cast steel
- Cobalt-based alloys
- Copper
- Fibre-reinforced thermosets (GRP, CFRP)
- Hardened, tempered steels over 1,200 N/mm² (< 38 HRC)
- Nickel-based alloys (e.g. Inconell and Hasteloy)
- Stainless steel (INOX)
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
- Thermoplastics
- Titanium
- Titanium alloys
Supplied with:
- Please order COMBIDISC sanding sheet holders separately.
- The fleece discs are supplied in a thickness of 6 mm.
Note:
- The maximum permissible peripheral speed is 50 m/s.