{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
POLIVLIES self-adhesive disc PVKR aluminium oxide dia. 180 mm A180M for fine grinding and finishing with an angle grinder
Article no.: 4007220354292
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| Type of product | Velour-backed abrasive disc |
Identification & Classification
| Article number | 4007220354292 | |
| EAN / GTIN | 4007220354292 | |
| Manufacturer number | 42871610 | |
| L-Number | L51050 891 | |
| Manufacturer/responsible person | August Rueggeberg GmbH & Co. KG, Hauptstraße 13, 51709 MARIENHEIDE, Germany, www.pferd.com |
Description
Version:
- medium, red-brown
Description:
POLIVLIES hook and loop discs are suitable for sanding larger surfaces. The flexible system of POLIVLIES hook-and-loop blanks and POLIVLIES hook-and-loop blanks holder also allows use on contours. Thanks to the pre-punched holes, they can be used optimally centred on various backing pads. They are particularly suitable for processing large surfaces made of stainless steel (INOX). POLIVLIES grit size 180 M = medium (red-brown)
Feature:
- RPM, max: 3500 RPM
- RPM, opt: 2200 RPM
- Finish: medium, red-brown
- Abrasive: Aluminium oxide A
- ø outer metric: 180 mm
- Grit size: 180 M
Advantage:
- Highly economical due to high sanding performance and long service life.
- Produces a consistently high surface quality over the entire service life, as new, sharp abrasive is constantly released.
- Optimum contour adaptation thanks to high flexibility
Application:
- Recommendations for use: For best performance, use at a recommended cutting speed of 15-20 m/s. Use with POLIVLIES hook and loop probe holder. Break out pre-punched centre hole if required.
- Machining tasks: Cleaning; deburring; fine grinding in stages; roughening; structuring (matting, line matting and satin finishing); surface processing; weld seam processing
- Drive types: Angle grinder; cordless angle grinder
Material:
- Machinable materials:
- Aluminium
- brass
- bronze
- Cast steel
- Cobalt-based alloys
- Copper
- Fibre-reinforced thermosets (GRP, CFRP)
- Hardened, tempered steels over 1,200 N/mm² (< 38 HRC)
- Nickel-based alloys (e.g. Inconell and Hasteloy)
- Stainless steel (INOX)
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
- Thermoplastics
- Titanium
- Titanium alloys
- Zinc
Supplied with:
- Please order POLIVLIES hook and loop backing pad holder separately.