{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
COMBICLICK backing pad hard dia. 125 mm thread 5/8-11UNC for angle grinders 125
Article no.: 4007220223475
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| Type of product | Backing pad |
Identification & Classification
| Article number | 4007220223475 | |
| EAN / GTIN | 4007220223475 | |
| Manufacturer number | 44890162 | |
| Manufacturer/responsible person | August Rueggeberg GmbH & Co. KG, Hauptstraße 13, 51709 MARIENHEIDE, Germany, www.pferd.com |
Description
Version:
- hard
Description:
With this backing pad, COMBICLICK tools can be used on commercially available angle grinders. The COMBICLICK system consists of a specially developed backing pad and a rugged mounting system at the back of the tool. The unique geometry of the cooling slots ensures high air throughput, which in turn considerably reduces the thermal load on the abrasive material and the workpiece. Compared with conventional tools, the quick-mounting system, robust holder, secure tool-locking feature and integrated cooling system together achieve a workpiece temperature that is 30 % lower, a 25 % higher stock removal rate, a 30 % longer tool life, and better utilization of the abrasive material. Hardness CC-H-GT (hard) = blue
Feature:
- PFERD type: CC-H-GT 125
- RPM, max.: 12200 RPM
- Suitable for dia. metric: 125
- Suitable for: Angle grinders 125, spindle 5/8″
- Version: hard
- Dia. external, metric: 125 mm
- Dia. thread: 5/8
Advantage:
- The geometry of the cooling slots significantly reduces the thermal load.
- High economic efficiency due to minimal tool change times.
- The innovative quick-mounting system ensures convenient handling and rapid tool changing.
Note:
- The maximum permitted peripheral speed is 80 m/s.
- For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.