{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
PFERD TOOLS Tungsten carbide high-performance burr set STEEL 1812 5-piece dia. 12 mm shank dia. 6 mm for steel
Article no.: 4007220004357
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Identification & Classification
| Article number | 4007220004357 | |
| EAN / GTIN | 4007220004357 | |
| Manufacturer number | 21901812 | |
| L-Number | L51700 100636 | |
| Manufacturer/responsible person | August Rueggeberg GmbH & Co. KG, Hauptstraße 13, 51709 Marienheide, Germany, www.pferd.com |
Description
Description:
- With the innovative STEEL cut, PFERD TOOLS has developed unique burrs for working with steel and cast steel.
- They feature tangibly increased aggressiveness and good guidance.
- They thus ensure safe and precise work.
- Thanks to their extremely high stock removal rate, burrs with the STEEL cut help users save considerable time when working, thus making them an economically efficient option.
- Set 1812 STEEL contains five tungsten carbide burrs for processing steel and cast steel in the most common shapes and dimensions.
- The sturdy plastic box protects the tools from dirt and damage.
- The burrs are secured at the shanks, facilitating the selection and withdrawal of the tools.
- Five further slots are available for other burrs.
- PFERD TOOLS ERGONOMICS recommends burrs with the STEEL cut as an innovative tool solution for comfort when working, with significantly reduced vibration and less noise.
- PFERD TOOLS EFFICIENCY recommends burrs with the STEEL cut for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.
Feature:
- PFERD TOOLS type: 1812 STEEL
- Cut: STEEL
- Dia. shank, metric: 6 mm
Advantage:
- Up to 50 % higher stock removal rate when used on steel and cast steel in comparison to conventional cross-cut burrs.
- Tangibly more aggressive, large chips and very good chip removal through the innovative tooth geometry.
- Workpieces are protected through significantly lower thermal load.
- The highly accurate concentricity enables impactfree working without creating chatter marks and the drive is subject to less wear.
Application:
- Recommendations for use: To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible. Observe the recommended rotational speeds.
- Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams
- Drive types: Flexible shaft drive; Tool machine; Automated centres; Straight grinder
Material:
- Materials that can be worked:
- Case-hardened steels
- Cast steel
- Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
- Steel
- Steel, cast steel
- Steels up to 1,200 N/mm² (< 38 HRC)
- Steels over 700 N/mm² (> 220 HB)
- Steels up to 700 N/mm² (< 220 HB)
- Tool steels
- Materials that can be worked: Case-hardened steels; Cast steel; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Steel; Steel, cast steel; Steels up to 1,200 N/mm² (< 38 HRC); Steels over 700 N/mm² (> 220 HB); Steels up to 700 N/mm² (< 220 HB); Tool steels
Note:
- The very high stock removal rate can cause discolouration on the shank. This does not constitute a safety risk.