{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Revolving lathe centre shock absorbing, Morse taper: 3
Article no.: 321405 3
Article code:
Product details
Technical Data
| Morse taper | MT3 | |
| Body ⌀ D | 60 mm | |
| Reach B | 95 mm | |
| largest centre point ⌀ A | 25 mm | |
| maximum radial run-out | 0.005 mm | |
| maximum speed | 5,000 rpm | |
| for workpiece weight | 300 kg | |
| Type of product | Centring drill |
Identification & Classification
| Article number | 321405 3 | |
| EAN / GTIN | 4045197720948 | |
| Manufacturer number | 321405 3 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- Point angle 60°.
- Sprung live centre to compensate pressure and length, shock-absorbing.
- Live centre of through hardened tool steel precision ground to match the bearing.
- Precision roller bearing, lubricated for life.
- Shaft seal prevents ingress of dirt and coolant.
- Extremely rigid version with additional shaft bearing.
- Entire tool is hardened and ground.
Precision version.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
- For damping impacts.
- For compensating thermal expansion.
- Suitable for use with face drivers.