{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Turning tool, wide neutral, similar to DIN 4976 (ISO 4), P20/K25, Shank height: 12mm
Article no.: 296605 12
Article code:
Product details
Technical Data
| Tool material | P20/K25 | |
| Shank height h | 12 mm | |
| Overall length | 100 mm | |
| Shank width b | 12 mm | |
| Blade width | 12 mm | |
| Type of product | Turning tool |
Identification & Classification
| Article number | 296605 12 | |
| EAN / GTIN | 4045197519498 | |
| Manufacturer number | 296605 12 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Carbide − steel shanks with 700 - 800 N/mm2 strength and flat chamfered mounting surface. Fitted with diamond ground carbide inserts. Angles on the inserts are precision ground. All turning tools are supplied with sharp cutting edges. Sharpening the cutting edge with a boron carbide hand lapper will increase the tool edge life. The extent of the wear area is dependent on the cutting conditions. For roughing and interrupted machining it is imperative that the cutting edges are sharpened.
Fitted with diamond ground carbide inserts.
Fitted with diamond ground carbide inserts.
Application:
P20/K25 for machining steel and cast iron.
M20 for machining stainless steels.
M20 for machining stainless steels.
Attention:
For rough and interrupted machining the cutting edges should be sharpened with a boron carbide hand lapper (No. 558812).