{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Guide bush for bore H7, Bush ⌀: 20C1mm
Article no.: 290415 20C1
Article code:
Offers
Product details
Technical Data
| Bush ⌀ | 20 mm | |
| Slot width | 9.63 mm | |
| Length | 64 mm | |
| Type of product | Broach |
Identification & Classification
| Article number | 290415 20C1 | |
| EAN / GTIN | 2050001096326 | |
| Manufacturer number | 44439 |
Description
Version:
With collar.
Application:
Push broaches with identification mark A and guide bushes with identification mark A can be used together.
The same applies to the other markings. So that the broach can run through to its full height and can drop back again freely, the guide bush must be inserted into the press bedplate at the same time as the workpiece is threaded through.
The same applies to the other markings. So that the broach can run through to its full height and can drop back again freely, the guide bush must be inserted into the press bedplate at the same time as the workpiece is threaded through.
Note:
Further sizes available on request.