{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Face mill / shoulder mill 90° with Weldon shank, for indexable inserts SO..
Article no.: 215045 25/2
Article code:
- Setting angle κ: 90
- Milling application: End milling
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| Cutting edge ⌀ DC | 25 mm | |
| Number of cutting edges Z | 2 | |
| Shank type | Weldon shank | |
| Setting angle κ | 90 degrees | |
| Milling application | End milling | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| Overhang L1 | 31 mm | |
| Overall length Ltot | 105 mm | |
| Shank ⌀ Ds h6 | 25 mm | |
| suitable indexable insert | SOMT 09T304 | |
| Set of insert screws | 219810 (9IP; 2.2 Nm) | |
| Type of product | End / face mill |
Identification & Classification
| Article number | 215045 25/2 | |
| EAN / GTIN | 4045197221674 | |
| Manufacturer number | 215045 25/2 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Made of hardened special steel for low vibration and long life. Very good surface finishes are obtained due to projecting flat cutting edge.