{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Punch hole Ø 28,2 mm
Article no.: 121-282
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Identification & Classification
| Article number | 121-282 | |
| EAN / GTIN | 4021176079757 | |
| Manufacturer number | 121-282 | |
| L-Number | L80010 105784 | |
| Manufacturer/responsible person | Kleinbongartz & Kaiser oHG, Heinrich-Hertz-Straße 5, 40704 Hilden, Germany, www.kukko.com |
Description
Description:
- The screw punches of series 121 are used for uniformly punching plastic support rods for distance sensors as well as for stamping holes in thin-walled materials. During the working process, the workpiece is not deformed. Each screw punch consists of a punch, a die, and a pressure screw in a particularly stable design.
- Special cutting geometry prevents the detachment of the carriage paint
- Can be used without any problems on already painted bumpers.
Feature:
- Material: tool steel
- Width across flats [mm]: 17 mm
- Spare parts available: No
- Total length [mm]: 61,5 mm
- Total length [inch]: 2 7/16
- Spindle thread dimension: M10x1
- Outer diameter [mm]: 39 mm
- Hole diameter [mm]: 28,2
- Hole diameter [inch]: 1 1/8
- Sheet thickness max. (stainless steel) [mm]: 1,2 mm
- Sheet thickness max. (steel) [mm]: 2 mm
- Screw punch with bearing: Yes
- Can be sold worldwide: Yes (REACH, RoHS, POP, PROP65, TSCA)
- Sheet thickness max. (aluminum) [mm]: 2 mm
- Sheet thickness max. (copper) [mm]: 2 mm