{{ name }}
Artiklové číslo {{ combinedCodeWithHighlight }}
Vaše materiálové číslo:
EAN / GTIN:
Číslo výrobce:
Katalogové číslo:
TK vrták GARANT Master Steel Feed válcová stopka DIN 6535 HB, TiAlN, ⌀ DC h7: 10,2mm
Artiklové číslo: 123236 10,2
Vaše materiálové číslo:
- Schneidstoff: VHM
- Norm: Werksnorm
- Ausführung: 12×D
- Toleranz Nenn-⌀: h7
- Anzahl Schneiden Z: 3
Údaje o výrobku
Technické údaje
| Serie | Master Steel | |
| Nenn-⌀ DC | 10,2 mm | |
| Beschichtung | TiAlN | |
| Schneidstoff | VHM | |
| Norm | Werksnorm | |
| Ausführung | 12×D | |
| Toleranz Nenn-⌀ | h7 | |
| Anzahl Schneiden Z | 3 | |
| Spitzenwinkel | 140 Grad | |
| empfohlene maximale Bohrtiefe L2 | 140,7 mm | |
| Schaft | DIN 6535 HB mit h6 | |
| Innenkühlung | ja, mit 25 bar | |
| Zerspanungsstrategie | HPC | |
| Semi-Standard | ja | |
| Spannutenlänge Lc | 156 mm | |
| Gesamtlänge L | 204 mm | |
| Schaft-⌀ Ds | 12 mm | |
| Vorschub f in Stahl < 1100 N/mm2 | 0,5 mm/U | |
| Farbring | grün | |
| Produktart | Spiralbohrer |
Identifikace a klasifikace
| Katalogové číslo | 123236 10,2 | |
| EAN / GTIN | 4045197843074 | |
| Číslo výrobce | 123236 10,2 | |
| Výrobce/odpovědná osoba | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Aplikační tabulka
P
120
P
110
P
100
P
90
P
70
H
60
M
55
M
50
S
40
K
120
K
80
Popis
Version:
3-flute drill, specially developed for use at very high feed rates. Outstandingly suitable for machines with high installed power and stable machining conditions.
The sector-leading technology of the drill point guarantees optimum self-centring behaviour. 3 guide chamfers guarantee a stable exit from the hole and an exact roundness of the hole.
- Special cutter geometry with stable cutting edges and large clearance at the centre enables very high feed rates.
- The patented tip is optimised for chip flow and generates low cutting pressure with good chip breakage.
The sector-leading technology of the drill point guarantees optimum self-centring behaviour. 3 guide chamfers guarantee a stable exit from the hole and an exact roundness of the hole.
Note:
Flute length LC = L2 + 1.5 × DC.
For process reliability when using the 12×D deep-hole drill, an initial centre drilling with an NC spotting drill No. 121130 with 155° point angle is necessary.
For process reliability when using the 12×D deep-hole drill, an initial centre drilling with an NC spotting drill No. 121130 with 155° point angle is necessary.