{{ name }}
Nr art. {{ combinedCodeWithHighlight }}
Nr własny produktu:
EAN / GTIN:
Numer producenta:
Nr kat.:
Malleable cast iron screw clamp TPN-BE 1000/170
Nr art.: TP100S17BE
Nr własny produktu:
UWAGA:
Ten produkt jest zamawiany bezpośrednio u producenta i nie znajduje się w naszym magazynie – czas dostawy może być wydłużony.Ostateczna cena zostanie wyświetlona po dodaniu produktu do koszyka i przejściu do kasy.Produkt nie podlega zwrotowi.
InformacjeSzczegóły produktu
Dane techniczne
| Rodzaj produktu | Clamp |
Identyfikacja i klasyfikacja
| Numer artykułu | TP100S17BE | |
| EAN / GTIN | 4008158015477 | |
| Numer producenta | TP100S17BE | |
| Numer L | L80030 485 | |
| Producent/osoba odpowiedzialna | BESSEY Tool GmbH & Co. KG, Muehlenwieserstraße 40, 74321 Bietigheim-Bissingen, Deutschland, www.bessey.de |
Opis
Opis:
- Clamping force up to 5,500 N
- Ergonomically shaped wood handle
- With protective caps on the clamping surfaces
- Stable profiled rail with serration
Cecha szcz.:
- Overhead: 175 mm
- Material / surface:
- Upper and lower parts made of reinforced malleable cast iron, powder coated
- Hollow profile rail made of steel, cold drawn, galvanized
- Spindle with trapezoidal thread made of steel rolled, burnished
- Wooden handle, water-based lacquer
- Pressure plate made of steel, cold pressed, galvanized
- Plastic protective caps
- Rail: 32x10 mm
- Wingspan: 1000 mm
Zastosowanie:
- Interior fittings
- Shell construction
- DIY
- Furniture and joinery works
- Kitchen construction and shop fitting
- Carpentry and woodwork
- Powerful and rigid clamping
Wskazówka:
- Danger warnings:
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Care instructions:
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean the fluting on the rails with a steel brush
- Clean and oil the spindle regularly
- If the lower part slips, turn the grub screw a 1/4 turn further (TG, KRE, KREV only)
- Clean and oil the pressure plate regularly