{{ name }}
Nr art. {{ combinedCodeWithHighlight }}
Nr własny produktu:
EAN / GTIN:
Numer producenta:
Nr kat.:
3M™ Fit Test Collar, FT-15
Nr art.: 7000051789
Nr własny produktu:
UWAGA:
Ten produkt jest zamawiany bezpośrednio u producenta i nie znajduje się w naszym magazynie – czas dostawy może być wydłużony.Ostateczna cena zostanie wyświetlona po dodaniu produktu do koszyka i przejściu do kasy.Produkt nie podlega zwrotowi.
InformacjeSzczegóły produktu
Identyfikacja i klasyfikacja
| Numer artykułu | 7000051789 | |
| EAN / GTIN | 00051138163549 | |
| Numer producenta | 7000051789 | |
| Numer L | L01130 111158 | |
| Producent/osoba odpowiedzialna | 3M DEUTSCHLAND GmbH PELTOR Service Center, Carl-Schurz-Straße 1, 41453 Neuss, Deutschland, www.3mdeutschland.de |
Opis
Opis:
3M™ Fit Test Collar FT-15 provides a rigid supportive frame for the 3M™ Fit Test Hood FT-14. 3M Fit Testing kits and accessories are designed to help your organisation meet fit testing requirements for tight fitting respirators. These products can be used to validate face to respirator seal on any disposable respirator or half mask respirator (fitted with a particulate P3 filter for the duration of the fit test). 3M recommends users are face-fit tested before using a respirator and repeated regularly as part of their occupational respiratory protection program.Follow all applicable national and other guidance with respect to face fit testing. In the UK please see further guidance from the Health and Safety Executive (HSE) and their guidance document INDG 479 or contact 3M.
Zaleta:
- A replacement part for 3M™ Qualitative Fit Test Apparatus Kits FT-10 Sweet and FT-30 Bitter
- Used to fit test 3M™ Disposable and Reusable Half Face Respirators
- Packaging: 2 per pack.
- 5 packs per case
- For Occupational Use only
- 3M™ recommends users are face-fit tested before using a respirator and repeated regularly as part of their occupational respiratory protection program.
- Follow all applicable national and other guidance with respect to face fit testing.
- In the UK please see further guidance from the Health and Safety Executive (HSE) and their guidance document INDG 479 or contact 3M™