{{ name }}
Nr art. {{ combinedCodeWithHighlight }}
Nr własny produktu:
EAN / GTIN:
Numer producenta:
Nr kat.:
2-jaw universal puller with swiveling jaws, grease hydraulic spindle, up to 180 mm spread, 200 mm reach
Nr art.: 41-5-B
Nr własny produktu:
UWAGA:
Ten produkt jest zamawiany bezpośrednio u producenta i nie znajduje się w naszym magazynie – czas dostawy może być wydłużony.Ostateczna cena zostanie wyświetlona po dodaniu produktu do koszyka i przejściu do kasy.Produkt nie podlega zwrotowi.
InformacjeSzczegóły produktu
Identyfikacja i klasyfikacja
| Numer artykułu | 41-5-B | |
| EAN / GTIN | 4021176887345 | |
| Numer producenta | 41-5-B | |
| Producent/osoba odpowiedzialna | Kleinbongartz & Kaiser oHG, Heinrich-Hertz-Straße 5, 40704 Hilden, Deutschland, www.kukko.com |
Opis
Opis:
- The 2-jaw universal puller with swiveling jaws and hydraulic spindle is used for pulling bearings, gears and discs in all common sizes for crafts, workshops, and industry. The hydraulic spindle achieves an average pulling force of up to 10 t. This allows for loosening any component that is mounted on a shaft and is freely accessible from the outside. The swiveling jaws also provide maximum freedom of movement for individual adaptation to the respective spread and depth, even under restricted environmental conditions. For pulling operations in tight spaces, the mechanical spindle can be utilized.
- Swiveling puller jaws allow for work in tight spaces while simultaneously providing individual adjustment for spread and reach.
- The hydraulic spindle guarantees easy and controlled removal of particularly tight-fitting parts with minimal effort.
Cecha szcz.:
- Material: tool steel
- Total width [mm]: 204 mm
- Total width [inch]: 8 1/32
- Total depth [mm]: 42 mm
- Total depth [inch]: 1 5/8
- Total height [mm]: 420 mm
- Total height [inch]: 16 9/16
- Width across flats [mm]: 12 mm
- Thread dimension: M10
- Span outside pull-off (max.) [inch]: 7 1/8
- Span outside pull-off (min.) [inch]: 1 1/32
- Span outside pull-off (max.) [mm]: 180 mm
- Clamping depth, external puller [mm]: 200 mm
- Clamping depth external puller [inch]: 7 7/8
- Hook root thickness at the tip (claw thickness K) [mm]: 5 mm
- Hook root thickness at the tip (claw thickness K) [inch]: 3/16
- Hook base width (claw width J) [mm]: 34 mm
- Hook base width (claw width J) [inch]: 1 5/16
- Hook base depth usable (claw depth usable O) [mm]: 23 mm
- Hook root depth usable (claw depth usable O) [inch]: 7/8
- Total hook root depth (total claw depth H) [mm]: 35 mm
- Total hook root depth (total claw depth H) [inch]: 1 3/8
- Total thickness of claws (L+1mm) [mm]: (distance of claws to base): 15 mm
- Total thickness of claws (L+1mm) [inch]: (distance of claws to base): 5/8
- Max. torque [Nm]: 15 Nm
- Max. torque [ft lb]: 11.06
- Max. tensile force [kN]: 100 kN
- Max. tractive force [t]: 10 t
- Max. pulling force [US t. sh.]: 11.02
- Reversible puller hooks: No
- Quick adjustment available: No
- Clamping bracket: No
- Spare parts available: Yes
- Max. torque (hydraulic) [ft lb]: 11.06
- Separation diameter (min. - max.) [mm]: 0 mm - 180 mm
- Can be sold worldwide: Yes (REACH, RoHS, POP, PROP65, TSCA)