{{ name }}
Nr art. {{ combinedCodeWithHighlight }}
Nr własny produktu:
EAN / GTIN:
Numer producenta:
Nr kat.:
PFERD TOOLS Overlap slotted disc KS dia. 50x5 mm thread 1/4-28 UNF A 80 for grinding narrow slots
Nr art.: 4007220152768
Nr własny produktu:
UWAGA:
Ten produkt jest zamawiany bezpośrednio u producenta i nie znajduje się w naszym magazynie – czas dostawy może być wydłużony.Ostateczna cena zostanie wyświetlona po dodaniu produktu do koszyka i przejściu do kasy.Produkt nie podlega zwrotowi.
InformacjeSzczegóły produktu
Identyfikacja i klasyfikacja
| Numer artykułu | 4007220152768 | |
| EAN / GTIN | 4007220152768 | |
| Numer producenta | 42865408 | |
| Numer L | L51100 487 | |
| Producent/osoba odpowiedzialna | August Rueggeberg GmbH & Co. KG, Hauptstraße 13, 51709 Marienheide, Deutschland, www.pferd.com |
Opis
Opis:
- Special tool for side grinding in grooves, fillets and slots.
- They are mounted via a central threaded hub.
- PFERD TOOLS ERGONOMICS recommends overlap slotted discs to sustainably reduce the vibration and noise produced during use and to improve comfort when working.
Cecha szcz.:
- Number, layers: 4 pcs.
- Max. RPM: 8000 RPM
- RPM, optimum: 4000 RPM
- Width, metric: 5 mm
- Abrasive: Aluminium oxide A
- Dia. external, metric: 50 mm
- Grit size: 80
Zaleta:
- Hard-to-reach areas can be accessed as the tool provides abrasive action on its top and bottom sides.
- High economic efficiency as tool can be changed quickly.
Zastosowanie:
- Recommendations for use: Hold the tool at an angle to grind with both disc sides.
- Applications: Deburring; Step-by-step fine grinding; Leveling; Structuring (matt finishing, brush matting and satin finishing); Surface work; Work on weld seams
- Drive types: Flexible shaft drive; Straight grinder
Materiał:
- Materials that can be worked:
- Aluminium
- Annealed cast iron
- Brass
- Cast steel
- Copper
- Grey/nodular cast iron (GG/GJL, GGG/GJS)
- Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
- Materials that can be worked: Aluminium; Annealed cast iron; Brass; Cast steel; Copper; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC)
W dostawie:
- Please order compatible arbor separately.
Wskazówka:
- The maximum permitted peripheral speed is 20 m/s.
- For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.