{{ name }}
Nr art. {{ combinedCodeWithHighlight }}
Nr własny produktu:
EAN / GTIN:
Numer producenta:
Nr kat.:
PFERD TOOLS Wheel brush crimped RBU dia. 50x10 mm shank dia. 6 mm stainless steel wire dia. 0.20
Nr art.: 4007220104774
Nr własny produktu:
UWAGA:
Ten produkt jest zamawiany bezpośrednio u producenta i nie znajduje się w naszym magazynie – czas dostawy może być wydłużony.Ostateczna cena zostanie wyświetlona po dodaniu produktu do koszyka i przejściu do kasy.Produkt nie podlega zwrotowi.
InformacjeSzczegóły produktu
Dane techniczne
| Rodzaj produktu | Wheel brush |
Identyfikacja i klasyfikacja
| Numer artykułu | 4007220104774 | |
| EAN / GTIN | 4007220104774 | |
| Numer producenta | 43103103 | |
| Numer L | L51510 275 | |
| Producent/osoba odpowiedzialna | August Rueggeberg GmbH & Co. KG, Hauptstraße 13, 51709 Marienheide, Deutschland, www.pferd.com |
Opis
Opis:
- Generally suitable for cleaning, derusting, smoothing, cleaning of weld seams, light deburring, and removal of corrosion and paint.
- In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD TOOLS uses wire quality 1.
- 4310/1.
- 4301 (V2A) for all INOX brushes.
- Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life.
- All PFERD TOOLS brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A.
- The wire quality 1.
- 4310/1.
- 4301 tends to become ferromagnetic in the case of cold working; i.
- e.
- it can be attracted using magnets.
- ;The reason for this is a change in the microstructure caused by deformation (e.
- g.
- during the wire drawing process).
- This does not have any impact on the quality and corrosion resistance of the INOX filament.
- The filament is still resistant to corrosion.
- Stainless steel wire (INOX) withstands temperatures up to 450 °C.
Cecha szcz.:
- Packaging: Industrial packaging
- Max. RPM: 15000 RPM
- RPM, optimum, from: 6000 RPM
- RPM, optimum, to: 9800 RPM
- Width, metric: 10 mm
- Mounting system: Shank
- Dia. filament material: 0.2 mm
- Dia. external, metric: 50 mm
- Dia. shank, metric: 6 mm
- Filament material: Stainless steel wire (INOX)
- Grit size: -
- Length, filament: 13 mm
- Length, total: 50 mm
Zaleta:
- Highly flexible, enabling optimal adjustment to the workpiece contour.
- Very good corrosion resistance.
- Creates fine surfaces.
Zastosowanie:
- Recommendations for use: Please observe the recommended rotational speeds. For the best results, use a tool drive with a minimum output of 300 watts.
- Applications: Cleaning; Deburring; Derusting; Removing heat discolouration; Removing oxide layers; Paint stripping; Roughening
- Drive types: Flexible shaft drive; Power drill; Straight grinder
Materiał:
- Materials that can be worked:
- Aluminium
- Bronze
- Cobalt-based alloys
- Hard non-ferrous metal
- High-temperature-resistant materials
- Nickel-based alloys (e.g. Inconell and Hastelloy)
- Nickel or titanium-based superalloys
- Other non-ferrous metals
- Soft titanium alloys (tensile strength 500 N/mm²)
- Stainless steel (INOX)
- Titanium
- Titanium alloys
- Materials that can be worked: Aluminium; Bronze; Cobalt-based alloys; Hard non-ferrous metal; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Other non-ferrous metals; Soft titanium alloys (tensile strength 500 N/mm²); Stainless steel (INOX); Titanium; Titanium alloys
Wskazówka:
- When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.