{{ name }}
Nr art. {{ combinedCodeWithHighlight }}
Nr własny produktu:
EAN / GTIN:
Numer producenta:
Nr kat.:
Torque spanner TORCOFIX Z 16 5-25 Nm
Nr art.: 3288293
Nr własny produktu:
UWAGA:
Ten produkt jest zamawiany bezpośrednio u producenta i nie znajduje się w naszym magazynie – czas dostawy może być wydłużony.Ostateczna cena zostanie wyświetlona po dodaniu produktu do koszyka i przejściu do kasy.Produkt nie podlega zwrotowi.
InformacjeSzczegóły produktu
Dane techniczne
| maksymalny moment obrotowy | 25 Nm |
Identyfikacja i klasyfikacja
| Numer artykułu | 3288293 | |
| EAN / GTIN | 4010886965627 | |
| Numer producenta | 3288293 | |
| Numer L | L60160 6190 | |
| Producent/osoba odpowiedzialna | GEDORE Werkzeugfabrik GmbH & Co. KG, Remscheider Straße 149, 42899 Remscheid, Deutschland, www.gedore.de |
Opis
Opis:
- Use:
- Controlled screw tightening in the most common range of 5 - 25 N·m / 3,7 - 18 lbf·ft
- Adjustable, releasing and sturdy tubular torque wrench with spigot end for industry and the trades
- Features:
- Classified as per DIN EN ISO 6789-2:2017 Type II Class A; adjusted to a maximum permissible +/-3% deviation and thus with a greater precision than the standard-stipulated +/-4%
- Incl. traceable test certificate (DIN EN ISO 6789-2:2017)
- For controlled right- and left-hand tightening (change tool for changing direction)
- Pin holder Ø 16 mm
- Working calibration pitch: 32 mm (Ø 16 mm)
- Robust, matt powder-coated tubular steel construction, with galvanized ratchet and high-quality plastic parts
- New ergonomic handle, shaped according to the natural grip position of the hand
- Clearly recognisable and tactile hand centring aid and calibration aid in the middle of the handle
- Double scale N·m / lbf·ft and vernier are protected from abrasion and contamination by an enlarged viewing window
- With vernier scale for N·m main scale for setting intermediate scale values; lbf-ft setting only via main scale
- Vertical alignment of the scale, torque adjustment therefore suitable for left and right handers
- Scale line positioned directly above the scale prevents reading errors (parallax errors)
- Unit labeling integrated in the scale frame and also protected by viewing windows,
- Precise jump-off mechanism generates a clearly perceptible and audible trigger signal when the set torque value is reached
- Incl. roll away protection, prevents rolling away when the tool is put down
Cecha szcz.:
- 1000 V insulated: no
- Actuator size [metric]: 16 mm
- Application range:
- Assembly
- Series assembly
- Fabrication
- Maintenance and repair
- Calibration length [mm]: 204,5 mm
- Drive type/drive: Drive end
- Fixed setting: no
- Fuse: Pin lock
- Lever length drive side [mm]: 32 mm
- Material: Tubular steel construction
- Precision: +/- 3 %
- REACH registration available: no
- Release mechanism: short travel release
- Scale division [lbf ft]: 1 lbf ft
- Scale division [Nm]: 1 Nm
- Scale division: yes
- Scale type: Dual
- Stitch size [metric]: 32,0 mm
- Storage: Plastic box
- Target groups:
- Automotive
- Industrial
- Construction and Commercial Vehicles
- Military
- Energy
- Mechanical Engineering
- Utility
- Service
- Agriculture
- Oil & Gas
- Test certificate: DIN EN ISO 6789-2:2017
- Tightening direction: Left and right
- Torque range (min./max.) [lbf ft]: 3,7 lbf ft - 18 lbf ft
- Torque range (min./max.) [Nm]: 5 Nm - 25 Nm
- Total height [mm]: 39,8 mm
- Total length [mm]: 266,5 mm
- Total width [mm]: 39 mm
- VDE certified: no
- Vernier Nm: 0,1 Nm
- Width of receiver [mm]: 16 mm