{{ name }}
Nr art. {{ combinedCodeWithHighlight }}
Nr własny produktu:
EAN / GTIN:
Numer producenta:
Nr kat.:
High Knurled Thumb Screws, DIN 464 , d1=M10 / l=20 mm / Steel, zinc-plated by galvanization
Nr art.: 24790.0573
Nr własny produktu:
UWAGA:
Ten produkt jest zamawiany bezpośrednio u producenta i nie znajduje się w naszym magazynie – czas dostawy może być wydłużony.Ostateczna cena zostanie wyświetlona po dodaniu produktu do koszyka i przejściu do kasy.Produkt nie podlega zwrotowi.
InformacjeSzczegóły produktu
Identyfikacja i klasyfikacja
| Numer artykułu | 24790.0573 | |
| EAN / GTIN | 4030618725978 | |
| Numer producenta | 24790.0573 | |
| Producent/osoba odpowiedzialna | Erwin Halder KG, Erwin-Halder-Straße 5-9, 88480 Achstetten, Deutschland, www.halder.com |
Opis
Opis:
Knurled screws are versatile. Three material versions are available for different requirements
Knurled screws can be easily tightened and loosened by hand. The knurled outer surface of the screw head prevents slipping when tightening/loosening with your fingers.
Knurled screws are manufactured from a single piece. Contrary to the standard sheet, they are generally manufactured with a thread up to the head and with a spout without a relief at the end of the thread. This means that the screws cannot be screwed in all the way to the collar.
Material
Knurling pitch and knurling depth may differ from DIN standards.
- Steel, burnished
- Steel, electro-galvanised
- stainless steel
Knurled screws can be easily tightened and loosened by hand. The knurled outer surface of the screw head prevents slipping when tightening/loosening with your fingers.
Knurled screws are manufactured from a single piece. Contrary to the standard sheet, they are generally manufactured with a thread up to the head and with a spout without a relief at the end of the thread. This means that the screws cannot be screwed in all the way to the collar.
Material
- Steel, electro-galvanised, grade 5.8
Knurling pitch and knurling depth may differ from DIN standards.