Threaded Lifting Pins, self-locking , d1=M8 / l1=12 mm / Heat-treated steel

Quick and easy to use, robust support element with movable shackle and safety bar to prevent accidental release. To lift loads, the threaded bolt is inserted into a threaded hole. Unlike a ring bolt, this eliminates the need for time-consuming screwing in and out.
Both versions are corrosion-protected. The stainless steel version also offers improved corrosion and weather resistance, making it suitable for outdoor use. Furthermore, the high-strength, precipitation-hardened bolt enables extreme loads.

Material
Bolt section

• Tempered steel, tempered, manganese phosphated

push button

• Aluminium, orange anodised

threaded element

• Stainless steel 1.4542, precipitation hardened

shackle

• Tempered steel, tempered, manganese phosphated

Feather

• Stainless steel

installation Threaded studs must be used in threads that are free of burrs.

Installation:

• Press and hold the button
• Insert threaded support bolt
• Release the button (the button must return to its original position).
• Turn the threaded support bolt by hand until it rests fully on the support surface.
• It must be ensured that the threaded segments are engaged in the mounting thread.

disassembly:

• Unscrew the threaded bolt approximately a quarter turn anticlockwise.
• Press and hold the button
• Pull out the threaded support bolt
• Release the button

operation Each threaded bolt is accompanied by operating instructions with an EC declaration of conformity.