{{ name }}
Nr art. {{ combinedCodeWithHighlight }}
Nr własny produktu:
EAN / GTIN:
Numer producenta:
Nr kat.:
Seperator with separating diameter 30 mm - 200 mm, 65 mm usable cutting depth (mounting thread G5/8)
Nr art.: 15-4
Nr własny produktu:
UWAGA:
Ten produkt jest zamawiany bezpośrednio u producenta i nie znajduje się w naszym magazynie – czas dostawy może być wydłużony.Ostateczna cena zostanie wyświetlona po dodaniu produktu do koszyka i przejściu do kasy.Produkt nie podlega zwrotowi.
InformacjeSzczegóły produktu
Identyfikacja i klasyfikacja
| Numer artykułu | 15-4 | |
| EAN / GTIN | 4021176007378 | |
| Numer producenta | 15-4 | |
| Producent/osoba odpowiedzialna | Kleinbongartz & Kaiser oHG, Heinrich-Hertz-Straße 5, 40704 Hilden, Deutschland, www.kukko.com |
Opis
Opis:
- The pulling devices of series 15 are used in conjunction with the pulling devices of series 18 for the removal of ball bearings, roller bearings, inner rings, and other flat components in crafts, industry, and workshops, when there is not enough space for puller jaws. The separating-pulling process is capable of initially separating those parts gently before they can be pulled off from the outside.
- The sharp edges allow for extraction where other extraction methods are not applicable.
- By screwing together the separation and pulling device, the highest stability during pulling is ensured.
Cecha szcz.:
- Material: tool steel
- Total width [mm]: 280 mm
- Total width [inch]: 11 1/32
- Total depth [mm]: 42 mm
- Total depth [inch]: 1 5/8
- Total height [mm]: 390 mm
- Total height [inch]: 15 3/8
- Width across flats [mm]: 41 mm
- Spare parts available: Yes
- Cut-off diameter (min.) [mm]: 30 mm
- Separating diameter (max.) [mm]: 200 mm
- Cutting edge thickness at the tip [mm]: 2 mm
- Rear cutting edge thickness [mm]: 15,6 mm
- Total cutting edge height [mm]: 103 mm
- Usable snow depth [mm]: 65 mm
- Mounting thread for tension bolt [mm]: G5/8
- Cutting diameter (min. - max.) [mm]: 30 mm - 200 mm
- Can be sold worldwide: Yes (REACH, RoHS, POP, PROP65, TSCA)