{{ name }}
Nr art. {{ combinedCodeWithHighlight }}
Nr własny produktu:
EAN / GTIN:
Numer producenta:
Nr kat.:
CAP blind rivet aluminium/steel flat round head 4 x 9.5, 500 pieces
Nr art.: 1433432
Nr własny produktu:
UWAGA:
Ten produkt jest zamawiany bezpośrednio u producenta i nie znajduje się w naszym magazynie – czas dostawy może być wydłużony.Ostateczna cena zostanie wyświetlona po dodaniu produktu do koszyka i przejściu do kasy.Produkt nie podlega zwrotowi.
InformacjeSzczegóły produktu
Identyfikacja i klasyfikacja
| Numer artykułu | 1433432 | |
| EAN / GTIN | 4007081450713 | |
| Numer producenta | 1433432 | |
| Producent/osoba odpowiedzialna | SFS Group Germany GmbH Division Medical - GESIPA, Nordendstraße 13-39, 64546 MÖRFELDEN-WALLDORF, Deutschland, www.gesipa.de |
Opis
Opis:
CAP - The cup blind rivet
CAP - Airtight and watertight by nature.
The structure:
For technical reasons, the rivet mandrel of the CAP blind rivet must be fixed in the hollow rivet. However, this means that the rivet body can only deform slightly during the setting process. As a consequence of this, a blind cup rivet has only marginal hole friction properties. However, these are necessary in order to be able to compensate for larger borehole tolerances.
A tight connection with care:
If the CAP blind rivet is processed carefully, it provides the basis for a reliable “tight” connection.
The technical conditions make very careful preparation of the application essential. The borehole diameter should be as small as possible to ensure proper function in the application over a long period of time.
CAP - Airtight and watertight by nature.
The structure:
For technical reasons, the rivet mandrel of the CAP blind rivet must be fixed in the hollow rivet. However, this means that the rivet body can only deform slightly during the setting process. As a consequence of this, a blind cup rivet has only marginal hole friction properties. However, these are necessary in order to be able to compensate for larger borehole tolerances.
A tight connection with care:
If the CAP blind rivet is processed carefully, it provides the basis for a reliable “tight” connection.
The technical conditions make very careful preparation of the application essential. The borehole diameter should be as small as possible to ensure proper function in the application over a long period of time.
Cecha szcz.:
- Diameter of the drill bit: 4.1 mm
- max. Clamping range: 5 mm
- min. Clamping range: 3.5 mm
- Material of the sleeve: Aluminium alloy
- Material of the pen: Steel, phosphatised
- spreading possible: No
- Length: 113 mm
- Head shape: Dome head
- min. Clamping length: 3.5 mm
- max. Clamping length: 5 mm
- Diameter of the head: 8.5 mm