{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Bench vice, Jaw width: 180mm
Article no.: 967100 180
Article code:
Product details
Technical Data
| Jaw width | 180 mm | |
| Jaw capacity | 220 mm | |
| Clamping depth | 110 mm | |
| Pipe jaws clamp pipes with outer ⌀ | 3/4 – 3.1/2 in | |
| Opening direction | opens to the front | |
| Material | Drop forged steel | |
| Weight | 27 kg | |
| Type of product | Machinist's vice |
Identification & Classification
| Article number | 967100 180 | |
| EAN / GTIN | 4062406393267 | |
| Manufacturer number | 967100 180 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Entirely of forged steel − guaranteed unbreakable.
Slides forward on opening. With pipe clamping jaws underneath the normal jaws. Powerful, CNC-machined precision spindle with rolled thread. Spindle and guides are protected from dirt. Large hardened anvil area for shaping and upsetting work. Double adjustable guide.
With solid, surface-hardened jaws (not interchangeable).
Slides forward on opening. With pipe clamping jaws underneath the normal jaws. Powerful, CNC-machined precision spindle with rolled thread. Spindle and guides are protected from dirt. Large hardened anvil area for shaping and upsetting work. Double adjustable guide.
With solid, surface-hardened jaws (not interchangeable).
Version - image:
Impact absorber washers.
Embossed measuring scale.
Guide setting: Internal hexagon screw with brass thrust washers – runs very easily.
Strong pipe jaws.
Embossed measuring scale.
Guide setting: Internal hexagon screw with brass thrust washers – runs very easily.
Strong pipe jaws.
Advantage:
- Tightening bar with impact-absorbing washers at both ends - no irritating noise when the bar falls through.
- Long-pitch thread spindle for quick opening and closing.
- Interchangeable tightening bar.
- Opening scale embossed into slide.
Supplied with:
Fasteners for attachment to the workbench.
Note:
For suitable height adjuster see No. 967520.
Warning:
Intended use
Reasonably foreseeable misuse
- Use only in enclosed spaces.
- Use only on a flat and clean base.
- Use for clamping workpieces.
- For clamping workpieces in the blank or partially machined state.
- Use only when correctly assembled.
- Use vice only with the spindle wrench supplied.
Reasonably foreseeable misuse
- Do not use in explosion hazard areas.
- Not for use in areas where high concentrations of dust, flammable gases, vapours or solvents are present.
- Do not make any unauthorised modifications.
- Use only original spare parts and wearing parts.
- It is not permissible to use auxiliary media when clamping items.