{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Support column for hooking into perforated panel, Height: 481mm
Article no.: 928060 481
Article code:
- Design version: Steel hollow section construction
- Height adjustment interval: 50
- Colour selection: RAL 9002, 7035, 7016, 5012, 5005
Product details
Technical Data
| Design version | Steel hollow section construction | |
| Height adjustment interval | 50 mm | |
| Colour selection | RAL 9002, 7035, 7016, 5012, 5005 | |
| Height | 481 mm | |
| Width | 80 mm | |
| Depth | 40 mm | |
| Weight | 2 kg | |
| Type of product | Support column |
Identification & Classification
| Article number | 928060 481 | |
| EAN / GTIN | 4062406112646 | |
| Manufacturer number | 928060 481 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Made of sturdy sheet metal. For hooking into a perforated panel for additional subdivision. With suspension slits, without threaded sockets. Also suitable for hooking in above perforated panel with brush strip.
Colour:
RAL 7035 light grey powder coated.
Note:
Only suitable for lower perforated panels; do not mount across two adjacent perforated panels.
Warning:
Intended use
Reasonably foreseeable misuse
- Use the workbench only when in good technical condition.
- If any faults occur which may affect safety, rectify them without delay.
- Only mount components on the designated holes Exclusively use approved Hoffmann Group accessories for modifications or rebuilding.
- For work in indoor industrial environments.
- For use on dry solid floors.
- Operate only in a dry environment.
Reasonably foreseeable misuse
- Do not place or position on the workbench.
- Do not carry people.
- Not for use in areas where the floor slopes upwards or downwards.
- Do not use in explosion hazard areas.
- No do expose it to water, precipitation or contamination.
- Not for use in areas where the floor is loose or unpaved.
- Do not overload the workbench, worktop, drawers or storage shelves.
- Do not make any unauthorised modifications.