{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Support leg with power and compressed air, Height 800 mm, Type: DE
Article no.: 927067 DE
Article code:
- Design version: Steel hollow section construction
- Colour selection: RAL 9002, 7035, 7016, 5012, 5005
Product details
Technical Data
| Design version | Steel hollow section construction | |
| Material thickness | 1 mm | |
| Colour selection | RAL 9002, 7035, 7016, 5012, 5005 | |
| Height | 800 mm | |
| Width | 50 mm | |
| Depth | 700 mm | |
| Socket type | F | |
| Nominal voltage | 250 V | |
| Rated current | 16 A | |
| suitable for worktop depth | 750 mm | |
| Type of product | Power module |
Identification & Classification
| Article number | 927067 DE | |
| EAN / GTIN | 4062406755614 | |
| Manufacturer number | 927067 DE | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Of steel hollow section, 50 mm wide with cross bracing and mounting for height adjustment at 25 mm intervals. Feet with plastic pads, do not damage the floor. With cable slots - for simple and professional routing of media cables / power cables.
Supplied with:
Support leg with two Schuko sockets with fastening materials, not wired.
Incl. safety one-hand coupling, quick-release coupling nominal value 7.2 and 3/8 inch connection thread, up to 10 bar.
Incl. safety one-hand coupling, quick-release coupling nominal value 7.2 and 3/8 inch connection thread, up to 10 bar.
Colour:
RAL 7035 light grey powder-coated.
Note:
Support legs without rear panel or cupboards require stabilising plates No. 927122 for stiffening. The height is to the underside of the worktop.
Pre-assembled workbenches must be secured against tipping.
Pre-assembled workbenches must be secured against tipping.
Warning:
Intended use
- Mount only on suitable holes.
- Support leg.
- Two enclosed sockets for installation by the customer in the support leg by a qualified electrician.
- Enclosed compressed air coupling for customer installation in the support leg (only item no.
- 927067, 927068) by a qualified mechanical engineer.
- Support leg for installation on the GridLine Vario workbench worktop with a depth of 750 mm.
- Assembly only in combination with stabilising plates, or alternatively with rear panel or drawer unit.
- Cable ducts in the leg for laying connecting cables.
- Stabilising plate.
- Stabilising plate for installation on the worktop and support leg of the GridLine Vario workbench.
- For stiffening and stabilising the workbench.
- Double stabilising plate: For connecting two worktops.
- For flush alignment of two worktops, additional installation of the joint strip is required.