{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Endoscope probe, elbow bend, flexible, 6 mm ⌀, Probe length: 1000mm
Article no.: 492942 1000
Article code:
- IP Index of Protection: IP 67
Product details
Technical Data
| Camera resolution | 640×480 px | |
| IP Index of Protection | IP 67 | |
| Probe ⌀ | 6 mm | |
| Probe length | 1,000 mm | |
| Type of product | Probe |
Identification & Classification
| Article number | 492942 1000 | |
| EAN / GTIN | 4045197565433 | |
| Manufacturer number | 492942 1000 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Sturdy watertight probe head (IP67) of stainless steel with dimmable white LEDs. Direction of view 0°.
Very high image quality with 16.7 million colours.
Illumination mode: Control switch for turning the image illumination on and off. For use in large voids and/or very dark surroundings.
Side-LED mode: When the screw-on probe mirror is used, activation of the side LEDs avoids generation of confusing reflections.
Image rotation: 90° image rotation clockwise using the control button.
Elbow bend probe head: Probe with hand grip and setting handle for bending the camera head in two directions (maximum 2× 155°). In conjunction with the probe mirror supplied, this allows inspection even of a recess that faces in the opposite direction to the insertion of the probe. A stop function for the desired angular position allows non-fatiguing working. Probe tip with braided metal protective sheath.
Image aperture angle 87.1°.
Very high image quality with 16.7 million colours.
Illumination mode: Control switch for turning the image illumination on and off. For use in large voids and/or very dark surroundings.
Side-LED mode: When the screw-on probe mirror is used, activation of the side LEDs avoids generation of confusing reflections.
Image rotation: 90° image rotation clockwise using the control button.
Elbow bend probe head: Probe with hand grip and setting handle for bending the camera head in two directions (maximum 2× 155°). In conjunction with the probe mirror supplied, this allows inspection even of a recess that faces in the opposite direction to the insertion of the probe. A stop function for the desired angular position allows non-fatiguing working. Probe tip with braided metal protective sheath.
Image aperture angle 87.1°.
Function:
IP67: Protected against intermittent immersion in water and protected against penetration by dust (dust-tight), also completely protected against touching.
Application:
Ideal for inspection of voids where access is difficult, e.g. automotive: Engine, gearbox, fuel tank, bodywork, dashboard, appraisal. Aerospace: engines, turbines, pipework, and wiring systems. Buildings: Assessment of the structure of buildings, water damage, pest infestation. Pipework systems: weld seams, traces of foreign bodies, leaks. Hydraulic systems: cylinders, leaks. Heating - sanitation - air conditioning: ovens, furnaces, boilers, air conditioning systems, drainage systems. Pest control: Bees' nests, wasps' nests, birds' nests, insect entry points. Police, customs: Vehicle checking, goods checking.
Suitable for:
Supplied with:
Screw-on probe mirror 70°.
Optional extras:
Adapter No. 492896 for using the probes with photo / video endoscope No. 492890 size 2000.
Note:
Other types of probe (up to 30 m) with other probe head ⌀ and directions of view available on request.
Probe for pipework inspection:
Probe for pipework inspection:
- Head ⌀: 28 mm
- Probe length: 22 m
- Image aperture angle: 150°
- 8 high-intensity LEDs.
Warning:
Intended use
Reasonably foreseeable misuse
- For checking, inspecting and investigating inaccessible and out of sight areas.
- For mounting on an endoscope.
- For use without accessories; use the probe only with the thread protective ring screwed on.
- The probe head can be used in unleaded petrol, machine oil, diesel, brake fluid (DOT 4), gear oil and neutral cleaner.
- For both industrial and private use.
- Use only when it is technically in good condition and safe to operate.
Reasonably foreseeable misuse
- Do not subject it to blows, impacts or heavy loads.
- Do not bend the probe through more than 155°.
- Do not use the probe head as a hook.
- Rotate the probe only by means of the rotary wheel, not directly at the probe head.
- Do not use in explosion hazard areas.
- Do not use in environments with flammable gases, vapours or solvents, such as in fuel or gas tanks.
- Do not open the casing.
- Do not make any unauthorised changes or modifications to it.
- Do not expose the work lamp to intense heat, direct sunlight or naked flames.