{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
FMI-S10 Digital force gauge (solar), Measuring range: 500N
Article no.: 478980 500
Article code:
- IP Index of Protection: IP 65
Product details
Technical Data
| Measuring range | 500 N | |
| Resolution | 0.5 N | |
| Error limit | ±0.3 maximum value (±1 digit) % | |
| IP Index of Protection | IP 65 | |
| Power supply | solar-powered | |
| Measurement technology | digital | |
| Connection thread | M6 | |
| Length | 150 mm | |
| Width | 82 mm | |
| Height | 29 mm | |
| Type of product | Draw bar pulling force gauge |
Identification & Classification
| Article number | 478980 500 | |
| EAN / GTIN | 4260244680376 | |
| Manufacturer/responsible person | PPT GmbH & Co. KG, Basler Straße 65, 79100 FREIBURG, Germany, www.alluris.de |
Description
Version:
- Sturdy force gauges in a handy aluminium die-cast housing for compressive and tensile forces from 0.001 to 2500 N.
- Overload protection up to 500% and protected measurement shaft.
- Attachment thread for additional handles.
- Precise positioning in test stands by a guide pin.
- Ready for use at all times thanks to the free-standing photo-voltaic power supply.
Function:
IP65: Protected against jets of water from all directions and protected against penetration by dust (dust-tight), also completely protected against touching.
Application:
Measurement of compressive and tensile forces in quality assessment and production. For use as a mobile manual measurement gauge both in outdoor areas and in test stands or jigs. Attachment thread integrated into the housing permit attachment in test stands or mounting of additional handles.
Supplied with:
Force gauge in a protective case. Screw-on accessories for force transfer (flat head, slot head, cone, hook). Quick-start instructions.