{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Centring vice, Width: 120Amm
Article no.: 363300 120A
Article code:
- Version: Zero-point clamping system
Product details
Technical Data
| Version | Zero-point clamping system | |
| Weight | 7.6 kg | |
| L | 180 mm | |
| B | 120 mm | |
| Height H | 59 mm | |
| Reference dimension | 80 mm | |
| maximum tightening torque | 100 Nm | |
| maximum clamping force | 28 kN | |
| Colour code | HOLEX ZS 120 | |
| Type of product | Machine vice |
Identification & Classification
| Article number | 363300 120A | |
| EAN / GTIN | 4067263101116 | |
| Manufacturer number | 363300 120A | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- Very good accessibility and perfectly symmetrical.
- Fully plasma-nitrided and precision milled on the underside.
- Clamps raw materials and finished parts with the least possible backstroke of the jaws / component.
- The clamping range can be changed by reversing the jaws.
Supplied with GARANT ZeroClamp adaptation with 80 mm pitch.
Includes 4 ZeroClamp clamping studs.
Includes 4 ZeroClamp clamping studs.
Application:
Perfect for 5-face machining. Centred clamping.
Suitable for:
Supplied with:
Base body, spindle, spindle nuts and four clamping studs suitable for automation extension base No. 360164 XP80Z.
Optional extras:
Note:
Suitable for the GARANT Turntable automation system in combination with / for automation extension base No. 360164 XP80Z. Suitable top jaws No. 363310 – 363324 are not included in the scope of supply. Clamping situation S2 arises by reversing the jaws.
Warning:
Intended use
Clamping device for mounting on a machine intended to perform milling operations. For clamping workpieces in the blank or partially machined state. Adaptation to workpiece geometry is possible through various designs and attachment jaws. Use only when correctly assembled and with safety devices and guards on the machine fully operational.
Reasonably foreseeable misuse
Do not use the centring vice for turning work. Do not mount components not in accordance with the specification. Do not make any unauthorised modifications. Do not use in explosion hazard areas.
Clamping device for mounting on a machine intended to perform milling operations. For clamping workpieces in the blank or partially machined state. Adaptation to workpiece geometry is possible through various designs and attachment jaws. Use only when correctly assembled and with safety devices and guards on the machine fully operational.
Reasonably foreseeable misuse
Do not use the centring vice for turning work. Do not mount components not in accordance with the specification. Do not make any unauthorised modifications. Do not use in explosion hazard areas.