{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Height adjustment for tool fitting fixture, Type: A
Article no.: 358585 A
Article code:
Product details
Technical Data
| Type of product | Height setting column |
Identification & Classification
| Article number | 358585 A | |
| EAN / GTIN | 4062406340506 | |
| Manufacturer number | 358585 A | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Including locking for secure fixing to the base rail.
Maximum A-dimension incl. tool = 300 mm.
Maximum A-dimension incl. tool = 300 mm.
The lever dial indicator transfers the height of the tool to be exchanged, including the measurement scale.
Suitable for:
Base rail No. 358565.
Note:
Caliper is not included in the scope of supply.
Warning:
Intended use
Reasonably foreseeable misuse
- To hold tools for tool assembly and disassembly.
- With accessories, the tool can also be measured or set to a specific length.
- Use only after installation with brackets mounted on a horizontal surface.
- Rear face in combination with easyFix wall mounting plate to accept easyFix hooks, holders and perforated panel accessories.
- Use exclusively approved Hoffmann Group accessories for modification or rebuilding.
- For both industrial and private use.
- Use only when it is technically in good condition and safe to operate.
Reasonably foreseeable misuse
- Do not use in explosion hazard areas.
- Do not subject it to blows, impacts or heavy loads.
- Not for use in areas where high concentrations of dust, flammable gases, vapours or solvents are present.
- Do not make any unauthorised modifications..