{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Cooling unit, Type: CU1
Article no.: 354215 CU1
Article code:
Product details
Technical Data
| Width | 430 mm | |
| Height | 902 mm | |
| Depth | 533 mm | |
| Weight | 39 kg | |
| Active cooler width | 413 mm | |
| Active cooler height | 415 mm | |
| Active cooler depth | 283 mm | |
| Active cooler power | 0.47 kW | |
| Active cooler weight | 22 kg | |
| Active cooler power supply | 230 V / 50 − 60 Hz | |
| Power supply | Mains operated | |
| Type of product | Cooling insert |
Identification & Classification
| Article number | 354215 CU1 | |
| EAN / GTIN | 4045197801784 | |
| Manufacturer number | 354215 CU1 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- Storage for cooling inserts.
- Stand-alone variant.
- 2 × positively driven contact cooler (no damage to the tool).
Application:
- For contour-dependent cooling.
Supplied with:
- Includes active cooler.
- 5 cooling inserts ⌀ 6 − 32 mm No. 354260.
Optional extras:
Note:
1.4 litres ethylene glycol (such as Glysantin G48) are required for operation of the active cooler.
Warning:
Intended use
Reasonably foreseeable misuse
- For clamping tools with shanks made of carbide and HSS in suitable clamping chucks by shrinking.
- Maximum shrink-fit tool length 500 mm.
- For use as a bench-top device.
- For work in industrial environments.
- Use only on a flat and clean base.
- Shrink only clean tools in clean chucks.
- Use only original spare parts and wearing parts.
- Use only when correctly assembled and with safety devices and guards on the machine fully operational.
- Use only when it is technically in good condition and safe to operate.
Reasonably foreseeable misuse
- Do not use unsuitable chucks.
- Do not use any highly flammable cleaning agents.
- Not for use in areas where high concentrations of dust, flammable gases, vapours or solvents are present.
- Do not use in explosion hazard areas.
- Do not make any unauthorised modifications.
- Not for use where there is exposure to intense heat, direct sunlight, naked flames or liquids.