{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Lightweight revolving lathe centre, Morse taper: 4
Article no.: 320675 4
Article code:
Product details
Technical Data
| Morse taper | MT4 | |
| Body ⌀ D | 70 mm | |
| Overall length L | 204 mm | |
| Reach B | 101.5 mm | |
| largest centre point ⌀ 60° A | 32 mm | |
| maximum radial run-out | 0.005 mm | |
| Centre point length C | 40 mm | |
| maximum speed | 3,800 min-1 | |
| for workpiece weight | 800 kg | |
| Type of product | Centring drill |
Identification & Classification
| Article number | 320675 4 | |
| EAN / GTIN | 5907412202761 | |
| Manufacturer number | 800006624 | |
| Manufacturer/responsible person | Bison Spanntechnik GmbH, Reisholzer Werftstraße Halle 3 42, 40589 DÜSSELDORF, Germany, www.bison-chuck.com |
Description
Version:
- Point angle 60°.
- Lightweight version, maintenance-free.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
For roughing and precision turning on lathes.