{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Revolving lathe centre 60°, Morse taper: 5
Article no.: 320657 5
Article code:
Product details
Technical Data
| Morse taper | MK5 | |
| Body ⌀ D | 78 mm | |
| Reach B | 118 mm | |
| largest centre point ⌀ 60° A | 32 mm | |
| maximum radial run-out | 0.005 mm | |
| Centre point length C | 47 mm | |
| maximum speed | 3,200 min-1 | |
| for workpiece weight | 2,000 kg | |
| Type of product | Centring drill |
Identification & Classification
| Article number | 320657 5 | |
| EAN / GTIN | 4045197774163 | |
| Manufacturer number | 320657 5 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- Punch axis of through-hardened steel mounted on shank bearings.
- Live centre through hardened, multiple regrinding possible.
- Precision roller bearings for high concentricity.
- Maintenance-free due to lifetime lubrication.
- Special seal prevents ingress of dirt and coolant.
- Complete tool hardened and ground.
Point angle 60°.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
For all types of lathe, equally suitable for roughing and finish turning.