{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Soft top jaw set, 3 pieces, for chuck type: 315
Article no.: 313315 315
Article code:
Product details
Technical Data
| for chuck type | 315 mm | |
| Length L | 145 mm | |
| Width B | 35 mm | |
| Height H | 50 mm | |
| Slot width D | 12 mm | |
| Bore spacing b | 54 mm | |
| Tenon length A | 26 mm | |
| suitable for colour code | Röhm self-centring chucks and jaws; Schunk self-centring chucks and jaws | |
| Type of product | Self-centring chuck jaws |
Identification & Classification
| Article number | 313315 315 | |
| EAN / GTIN | 4062406699147 | |
| Manufacturer number | 313315 315 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Unstepped, for boring out to individual clamping ⌀. Milled location faces, not burnished.
Application:
For fitting to hardened base jaws. For clamping irregularly shaped or already machined components which have to be protected against damage. The jaws are machined according to the contours of the component.
As the jaws can be changed or adjusted to the required diameter in just a few seconds, it is useful to have several jaw sets on hand ready for use at the machine. This minimises set-up times. The jaw units consist for example of several sets of base jaws with soft top jaws, which can be machined out to the required diameters. This rationalisation method is not only necessary for NC machines but also important for every lathe type.
As the jaws can be changed or adjusted to the required diameter in just a few seconds, it is useful to have several jaw sets on hand ready for use at the machine. This minimises set-up times. The jaw units consist for example of several sets of base jaws with soft top jaws, which can be machined out to the required diameters. This rationalisation method is not only necessary for NC machines but also important for every lathe type.
Material:
Quality product made of 16MnCr5.
Suitable for:
Schunk self-centring chucks No. 313115; 313117; 313135; 313137, Röhm self-centring chucks Duro No. 313120; 313140 and other self-centring chuck systems.
Note:
Size 400 also suitable for chuck size 500.
Aluminium top jaws on request.
Aluminium top jaws on request.