{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Three-jaw lathe chuck steel short taper mount, DIN 702-3, Outer ⌀ A / taper: 125/4mm
Article no.: 310705 125/4
Article code:
Product details
Technical Data
| Standard | DIN 702-3 | |
| Aperture E | 32 mm | |
| Height without jaws H1 | 69 mm | |
| Height with jaws H2 | 93 mm | |
| Number of studs | 3 | |
| Centring ⌀ B | 63.5 mm | |
| Size of studs | M10 | |
| Chuck key square K | 9 mm | |
| Weight | 6.2 kg | |
| maximum speed | 5,500 min-1 | |
| Colour code for accessories | Röhm geared scroll chucks and jaws | |
| Type of product | Gear scroll chucks |
Identification & Classification
| Article number | 310705 125/4 | |
| EAN / GTIN | 4019208525082 | |
| Manufacturer number | 185502 | |
| Manufacturer/responsible person | Röhm GmbH, Heinrich-Röhm-Straße 50, 89567 SONTHEIM/BRZ, Germany, www.roehm.biz |
Description
Version:
- Manual chucks with gear scroll, centrically clamping.
- Weight-reduced body of steel.
- Gear scroll drop-forged, balanced, and hardened.
- Flanks of scroll and of jaw serrations are ground.
- High concentricity.
Application:
The chuck is always fitted to the spindle nose directly without an intermediate flange.
For spindle noses DIN 55027 with studs and collar nuts.
For spindle noses DIN 55027 with studs and collar nuts.
Standard:
DIN 702-3.
Supplied with:
1 clamping wrench and fastening screws or studs depending on the chuck.
1 set = 3 hard inside jaws, stepped on the outside and 1 set = 3 hard outside jaws, stepped on the inside.
1 set = 3 hard inside jaws, stepped on the outside and 1 set = 3 hard outside jaws, stepped on the inside.