{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Stainless steel circular saw blade fine, ⌀×thickness: 250X2mm
Article no.: 177500 250X2
Article code:
- Tool material: HSS E
Product details
Technical Data
| ⌀ | 250 mm | |
| Thickness | 2 mm | |
| Tool material | HSS E | |
| Bore ⌀ | 40 mm | |
| No. of teeth Z | 250 | |
| Pitch t | 3 mm | |
| Number of drive holes | 2; 4 | |
| Drive hole ⌀ | 9; 12 mm | |
| Drive hole pitch circle | 55; 64 mm | |
| Suitable for material | Metal | |
| Through-coolant | no | |
| Type of product | Circular saw blade |
Identification & Classification
| Article number | 177500 250X2 | |
| EAN / GTIN | 4045197245281 | |
| Manufacturer/responsible person | Re-Bo REBER GmbH Spezialfabrik für Metallkreissäge, Ellwanger Straße 97, 73441 BOPFINGEN, Germany, www.re-bo.com |
Application Table
P
37
P
22
P
20
P
15
P
11
M
11
M
11
S
15
K
27
N
400
Description
Version:
Precision toothing and very fine ground side faces. Rake angle especially for stainless steels. Nitrided surface: hard, durable protection against edge build-up.
Application:
Pitch t: (tooth form)
- 3 mm (BW) − For thin pipes, profiles, sheet metal with 1 − 2 mm wall thickness.
- 4 mm (BW) − For pipes, profiles, sheet metal with 1.5 − 4 mm wall thickness.
- 6 mm (HZ) − For pipes, profiles and solid material above 4 mm wall thickness or cross−section up to a maximum of. 50 mm.
- 8 mm (HZ) − For solid material above 50 mm.
Suitable for:
EISELE and TRENNJAEGER cold circular saws.
Note:
- For optimum performance and service life: use coolant concentrate No. 084260.
- The concentricity and axial run-out values are considerably better than the figures according to DIN 1840, in some cases by up to 50 %.