{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Pair of gloves Pro Cut E / Impact, Glove size: 7
Article no.: 094606 7
Article code:
- Glove characteristics: DMF-free; Shock protection; Reinforced crook of the thumb
- Knitted technology: 13G
- Cut protection class: E
Product details
Technical Data
| Contents | 1 | |
| Glove characteristics | DMF-free; Shock protection; Reinforced crook of the thumb | |
| Knitted technology | 13G | |
| Drying | air dry | |
| EN 388 | 4X42EP | |
| Backing material | HPPE | |
| Coating | water-based PU/nitrile | |
| Coating variant | The palms of the hands | |
| Scope of application | Heavy Duty | |
| Colour | black / grey | |
| Glove size | 7 | |
| Length | 255 mm | |
| Application | reusable | |
| AQL | G-II 1.0 for critical, G-II 2.5 for major, G-II 4.0 for minor. | |
| Protection category | Category II | |
| Type of glove | Cut-resistant gloves | |
| Cut protection class | E | |
| Type of product | Cut-resistant gloves |
Identification & Classification
| Article number | 094606 7 | |
| EAN / GTIN | 4062406132903 | |
| Manufacturer number | 094606 7 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
HOLEX Pro Cut E. Seamless knitted cut-resistant gloves for protection against extreme cut hazards. PU nitrile foam coating for a very good secure grip even in oily and wet working environments. With reinforced thumb joint for longer life.
With additional protectors for the back of the hand in an innovative design for maximum protection and unusually high freedom of movement.
With additional protectors for the back of the hand in an innovative design for maximum protection and unusually high freedom of movement.
Standard:
EN 388; EN ISO 21420
Note:
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.
Warning:
Intended use
Reasonably foreseeable misuse
- Protect hands against mechanical risks, abrasion, blisters, and other superficial injuries.
- Optimum protection is obtained only when the area to be protected is completely covered. Where gloves have fastenings, check that these are securely closed. Protective gloves must not be allowed to slip. Select a suitable glove size.
- For precision work in oily or wet conditions.
Reasonably foreseeable misuse
- Gloves offer no protection against chemical, microbiological, thermal, electrical or laceration risks.
- Do not wear when close to rotating machine parts.
- Combination with other protective equipment must not impair the protective effect and must not hinder the wearer in his activities.