{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Circular saw blade coarse, ⌀×thickness: 225X2mm
Article no.: 177400 225X2
Article code:
- Tool material: HSS
Product details
Technical Data
| ⌀ | 225 mm | |
| Thickness | 2 mm | |
| Tool material | HSS | |
| Bore ⌀ | 40 mm | |
| No. of teeth Z | 90 | |
| Pitch t | 8 mm | |
| Number of drive holes | 2 | |
| Drive hole ⌀ | 8 mm | |
| Drive hole pitch circle | 55 mm | |
| suitable for saw makes | Eisele | |
| Suitable for material | Metal | |
| Through-coolant | no | |
| Type of product | Circular saw blade |
Identification & Classification
| Article number | 177400 225X2 | |
| EAN / GTIN | 4045197905369 | |
| Manufacturer/responsible person | Re-Bo REBER GmbH Spezialfabrik für Metallkreissäge, Ellwanger Straße 97, 73441 BOPFINGEN, Germany, www.re-bo.com |
Application Table
N
800
N
600
P
37
P
22
P
20
P
15
M
11
M
11
S
15
K
27
N
400
Description
Version:
German top quality product. Precision tooth geometry and very fine ground side faces. Significant increase in service life and protection against edge build-up due to the nitrided surface.
Application:
For low speed machines (approx. 50 rpm).
Pitch t: (tooth form).
Pitch t: (tooth form).
- 4 mm (BW) − For profiles and pipes with 1.0 − 1.5 mm wall thickness.
- 5 / 6 mm (HZ) −For medium profiles, pipes and solid bar with 1.5 − 20 mm wall thickness / cross-section.
- 7 / 8 mm (HZ) − For thick profiles and solid bar up to approx. 50 mm wall thickness / cross-section.
- 10 − 16 mm (HZ) − For extra thick cross-sections and solid bar more than 50 mm.
Note:
- For stainless steels (such as V2A) the correct cutting speed and lubrication is crucial (see information in the machining handbook No. 110020).
- The concentricity and axial run-out values are considerably better than those to DIN 1840, in some cases by up to 50 %.