{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Torque screwdriver with digital display, to take D 6.3 bits, maximum torque: 50cNm
Article no.: 659913 50
Article code:
- Direction of tightening: Right-hand tightening
- Torque measuring accuracy: ±6
- Bit socket: D 6,3
- Test certificate: Manufacturer’s test certificate
Product details
Technical Data
| Manufacturer's designation | DigiTorque V2 | |
| maximum torque | 50 cNm | |
| Direction of tightening | Right-hand tightening | |
| Torque measuring accuracy | ±6 % | |
| Bit socket | D 6,3 | |
| Test certificate | Manufacturer’s test certificate | |
| Overall length L | 127.5 mm | |
| Torque range | 10 cNm - 50 cNm | |
| Torque range | 0.1 Nm - 0.5 Nm | |
| Resolution | 1 cNm | |
| Display | digital | |
| Release signalling | acoustic | |
| Trigger principle | mechanical short-travel release | |
| Connection format | Bit holder 1/4 inch | |
| Measurement technology | mechanical | |
| Torque fixed setting | no | |
| Data can be recorded | no | |
| Setting the trigger value | digital, adjustable | |
| Feedback | triggering | |
| Reversible reading | Nm; lbfft | |
| Measurement process | Torque | |
| Adjustable trigger value | adjustable | |
| Standard | DIN EN ISO 6789 | |
| Weight | 72 g | |
| Type of product | Torque screwdriver |
Identification & Classification
| Article number | 659913 50 | |
| EAN / GTIN | 7610733288939 | |
| Manufacturer number | 9318.M 10-50 cNm |
Description
Version:
Power grip with non-allergenic elastomer coating allows transmission of the required torque with no problems even with wet or oily hands. On reaching the set torque value, the screwdriver can be felt and heard to trigger and is then again immediately ready for use. The release torque is higher than the tightening torque (overload protection).
Torque adjustment without using tools just pull the cap and turn it. The torque setting is displayed in a window (digital display at the end of the handle). Built-in electronics with NFC interface. Battery can be replaced by the customer (button cell CR 1/3 N; 3V). Units of measure: Nm, lbfft.
Bit holder with magnet to take C 6.3 bits.
Torque adjustment without using tools just pull the cap and turn it. The torque setting is displayed in a window (digital display at the end of the handle). Built-in electronics with NFC interface. Battery can be replaced by the customer (button cell CR 1/3 N; 3V). Units of measure: Nm, lbfft.
Bit holder with magnet to take C 6.3 bits.
Application:
For controlled tightening of screws to a pre-set torque.
Standard:
Tested to DIN EN ISO 6789.
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.