{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
GARANT Master Steel PickPocket solid carbide roughing end mill HPC, TiAlN, ⌀ f8 DC: 5mm
Article no.: 202404 5
Article code:
- Tolerance nominal ⌀: f8
- No. of teeth Z: 3
- Helix angle: 38
- Direction of infeed: horizontal, oblique and vertical
- Shank: DIN 6535 HB to h6
Product details
Technical Data
| Cutting edge ⌀ DC | 5 mm | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 3 | |
| Helix angle | 38 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 6535 HB to h6 | |
| Flute length Lc | 13 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner rounding rv | 0.25 mm | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.04 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.05 mm |
Identification & Classification
| Article number | 202404 5 | |
| EAN / GTIN | 4062406088125 | |
| Manufacturer number | 202404 5 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
260
P
240
P
190
P
180
P
150
M
80
M
70
K
250
Description
Version:
For roughing and finishing
With corner radii similar to torus cutters.
Up to 1×D into solid material at very high feed rates with smooth cutting action.
With corner radii similar to torus cutters.
Up to 1×D into solid material at very high feed rates with smooth cutting action.
Advantage:
Optimised flute form, eccentric relief ground, wide chip space.