{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Pallet basic rack, Depth 1100 mm, Height: 2500mm
Article no.: 991202 2500
Article code:
Click to enlarge image
Click to enlarge image
Basic rack and extension rack
Click to enlarge image
Application example
Click to enlarge image
- Shelf load capacity / maximum distributed shelf load (on metal): 1.545
- To take pallets with load capacity: 515
- Height adjustment interval: 50
- Type of installation: Plug-in racking
- Colour selection: RAL 5010, 2004
Product details
Technical Data
| Shelf load capacity / maximum distributed shelf load (on metal) | 1.545 kg | |
| To take pallets with load capacity | 515 kg | |
| Height adjustment interval | 50 mm | |
| Type of installation | Plug-in racking | |
| Colour selection | RAL 5010, 2004 | |
| Height | 2.500 mm | |
| Depth | 1.100 mm | |
| Assembled size basic rack width | 2.872 mm | |
| Compartment width | 2.700 mm | |
| Number of rack stiles | 2 | |
| Number of storage level | 3 | |
| Number of pallet slots per bay | 9 | |
| Shelf load capacity | 1.545 kg | |
| Bay load (3 bays each with 2 pairs of cross beams per bay) | 5.190 kg | |
| Rack installation | Basic rack | |
| Frame profile | S610-M18-U | |
| Cross-beam type: | LNS 100×50×1.5 | |
| Rack access | double-sided | |
| Plug-in assembly | yes | |
| Customer assembly | yes | |
| Type of product | Pallet racking |
Identification & Classification
| Article number | 991202 2500 | |
| EAN / GTIN | 4058255110049 | |
| Manufacturer number | 46900-N | |
| Manufacturer/responsible person | Gebr. Schulte GmbH & Co. KG, Zum Dümpel 22, 59846 SUNDERN, Deutschland, www.schulte-lagertechnik.com |
Description
Version:
Basic rack consisting of 2 profile frames each with 4 floor anchors and 2 or 3 cross beam pairs. Add-on rack consisting of 1 profile frame with 4 floor anchors and 2 or 3 cross beam pairs. Additional storage levels can be found under accessories.
Assembled size of basic rack: 2872 mm
Cross beams type LNS 100×50×1.5.
Assembled size of basic rack: 2872 mm
Cross beams type LNS 100×50×1.5.
Description:
Assembled size:
Overall length of the rack:
For frame stiles S610-M18-U and S625-A18:
Nominal length + number of stiles × 86 mm (for S610-M18-U)
Nominal length + number of stiles × 110 mm (for S625-A18).
Overall length of the rack:
For frame stiles S610-M18-U and S625-A18:
Nominal length + number of stiles × 86 mm (for S610-M18-U)
Nominal length + number of stiles × 110 mm (for S625-A18).
Colour:
Stiles similar to RAL 5017 traffic blue, cross beams similar to RAL 2004 pure orange powder-coated.
Note:
- On uneven floors we recommend additional shim plates.
- Supplied for self-assembly, saving freight costs. Delivered unassembled.
- Allow at least 100 mm for the foot plates between the frame stiles and walls or parts of the building.
When fitting cross-beams, make sure that the outer stiles project at least 500 mm above the topmost storage level. Within the row of racking, a projection of 100 mm is sufficient.
Technical provisions for erection of pallet racking according to BGR 234:
- End stiles adjacent to gangways and traffic routes must be at least 500 mm higher that the highest storage level.
- Pass-throughs and spans must be provided with a closure board (e.g. chipboard sheet).
- Clear pass-through height must be at least 2100 mm.
- End stiles and pass-throughs must be fitted with crash barriers.
- Single-sided racking that is free-standing in a room must be fitted with mesh rear panels to prevent stored goods falling out.
- Each row of racking must carry safe working load signs.
- Concrete grade: at least C20/25 to EN 206-1 (DIN 1045-2); concrete thickness at least 200 mm.
- If the distance between pallets in a double-sided rack is less than 100 mm, insertion stops should be provided.
Further information on planning and design:
- An important factor is the unsupported length (K) = the maximum distance between floor and the upper edge of the first cross-beam. The stile type is determined by this factor.
- Approx. 100 mm clearance should always be allowed to the next storage level, or the shop ceiling.
- Lift height of the handling equipment: Top of the uppermost cross beam plus 200 mm.
- All load specifications apply only to indoor installation. Earthquake loads and wind and snow loads are not taken into account and must be requested separately. Shelves that are to be installed in earthquake zones must be calculated and requested separately.