{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Torque screwdriver with scale, to take interchangeable blades, ESD, maximum torque: 200cNm
Article no.: 659918 200
Article code:
- electrostatic characteristic: EGB/ESD
- Direction of tightening: Right-hand tightening
- Torque measuring accuracy: ±6
- Test certificate: Manufacturer’s test certificate
Product details
Technical Data
| Manufacturer's designation | MecaTorque ESD | |
| maximum torque | 200 cNm | |
| electrostatic characteristic | EGB/ESD | |
| Direction of tightening | Right-hand tightening | |
| Torque measuring accuracy | ±6 % | |
| Test certificate | Manufacturer’s test certificate | |
| Overall length L | 124 mm | |
| Torque range | 40 cNm - 200 cNm | |
| Torque range | 0,4 Nm - 2 Nm | |
| Scale graduation, 1 graduation = | 5 cNm | |
| suitable interchangeable blades | 6 mm | |
| Display | analogue | |
| Release signalling | akustisk; haptisk | |
| Trigger principle | mechanical slip clutch | |
| Connection format | exchangeable blade | |
| Measurement technology | mechanical | |
| Torque fixed setting | no | |
| Data can be recorded | no | |
| Setting the trigger value | with adjustment scale | |
| Feedback | triggering | |
| Reversible reading | Nm | |
| Measurement process | Torque | |
| Adjustable trigger value | adjustable | |
| Standard | DIN EN ISO 6789 | |
| Weight | 97 g | |
| Type of product | Torque screwdriver |
Identification & Classification
| Article number | 659918 200 | |
| EAN / GTIN | 7610733269440 | |
| Manufacturer number | 8317.A 200 ESD |
Description
Version:
Power grip with non-allergenic elastomer coating allows transmission of the required torque with no problems even with wet or oily hands. On reaching the set torque value, the screwdriver can be felt and heard to trigger and is then again immediately ready for use. The release torque is higher than the tightening torque (overload protection).
The desired torque is set using an adjustment wheel at the end of the handle. Putting the wheel into the locked position prevents inadvertent changes to the setting. Easy to read micrometer scale, protected against dirt.
Suitable for ESDs.
The desired torque is set using an adjustment wheel at the end of the handle. Putting the wheel into the locked position prevents inadvertent changes to the setting. Easy to read micrometer scale, protected against dirt.
Suitable for ESDs.
Application:
For controlled tightening of screws to a pre-set torque.
Standard:
Tested to DIN EN ISO 6789.
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.