{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Cubitron™ III fibre disc (CER) 1182C, ⌀ 115 mm, Grit: 36
Article no.: 566461 36
Article code:
- Grinding medium code: Ceramic
- Iron, sulphur and chlorine constituents: < 0.1
- Bore ⌀: 22,23
- optimised for material: Steel; Cast iron; INOX
- maximum circumferential speed: 80
Product details
Technical Data
| Series | Cubitron™ III | |
| Grinding media | Cubitron™ III | |
| Grinding medium code | Ceramic | |
| Grit | 36 | |
| Grinding media backing | Vulcanised fibre | |
| Iron, sulphur and chlorine constituents | < 0.1 % | |
| Disc ⌀ | 115 mm | |
| Contents | 25 | |
| Bore ⌀ | 22,23 mm | |
| Manufacturer's designation | 1182C | |
| optimised for material | Steel; Cast iron; INOX | |
| Propulsive equipment | Angle grinders | |
| maximum circumferential speed | 80 m/s | |
| Type of product | Fibre disc |
Identification & Classification
| Article number | 566461 36 | |
| EAN / GTIN | 068060664471 | |
| Manufacturer/responsible person | 3M DEUTSCHLAND GmbH, Carl-Schurz-Straße 1, 41453 NEUSS, Deutschland, www.3mdeutschland.de |
Application Table
Description
Version:
The precisely formed high-performance abrasive grit in 3M™ products consists of defined ceramic triangles optimally arranged on the grinding surface. Greatly increased removal rate with very long working life and even finish.
Extremely tear-resistant but very flexible vulcanised fibre. Bore diameter 22.23 mm and crossed slots.
Offers a faster and sustained material removal rate compared to the 3M™ Cubitron™II fibre disc 982C.
Extremely tear-resistant but very flexible vulcanised fibre. Bore diameter 22.23 mm and crossed slots.
Offers a faster and sustained material removal rate compared to the 3M™ Cubitron™II fibre disc 982C.
Application:
Limited to maximum 80 m/s circumferential speed with backing pads No. 566690 / 566692 on angle grinders. The quick-cutting abrasive grit permits comfortable and ergonomic working without the need to exert great pressure. At the same time, the high removal rate of 3M™ fibre discs makes them a real alternative to roughing discs and flap discs.
For the machining of steel and non-ferrous metals.
For the machining of steel and non-ferrous metals.