{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Solid lathe centre WS 1 HOLEX
Article no.: 323400 1
Article code:
Product details
Technical Data
| Morse taper | 1 | |
| External ⌀ D | 12,2 mm | |
| Overall length L | 80 mm | |
| Type of product | Centring drill |
Identification & Classification
| Article number | 323400 1 | |
| EAN / GTIN | 4045197296603 | |
| Manufacturer number | 323400 1 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Description
Version:
Point angle 60°, surfaces ground.
Full point of tool steel, through hardened.
Full point of tool steel, through hardened.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Standard:
DIN 806