{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Alternative article:
-
Article no.: 309616 40
ER clamping nut for sealing rings 40
Article no.: 309615 40
Article code:
- Standard: DIN 6499 D
- Balance quality G at rotational speed: G 2.5 at 25,000 rpm
Product details
Technical Data
| for ER | 40 mm | |
| Standard | DIN 6499 D | |
| Balance quality G at rotational speed | G 2.5 at 25,000 rpm | |
| Overall length L | 30,5 mm | |
| External ⌀ D | 63 mm | |
| Thread | M50×1.5 | |
| maximum tightening torque | 240 Nm | |
| Type of product | Clamping nut |
Identification & Classification
| Article number | 309615 40 | |
| EAN / GTIN | 7640128492207 | |
| Manufacturer number | 5.450.40 |
Description
Version:
Thread and taper ground in a single setup for highest concentricity.
Nut coated for: lower friction and increased clamping force coupled with high wear resistance and corrosion resistance.
Nut coated for: lower friction and increased clamping force coupled with high wear resistance and corrosion resistance.
With slots.
Suitable for:
All standard ER collet chucks.
Optional extras:
ER clamping wrench, No. 309680 − 309740.
Single open ended spanner (for size 16), No. 613300 size 25.
Sealing rings No. 309625; 309630; 309635; 309645.
Single open ended spanner (for size 16), No. 613300 size 25.
Sealing rings No. 309625; 309630; 309635; 309645.
Note:
Collet chuck and clamping nut are balanced separately!