{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Alternative article:
-
Article no.: 139733 10-24
GARANT Master TM plain shank thread mill with countersink 2×D, TiAlN, UNC: 10-24
Article no.: 139723 10-24
Article code:
- Thread type: UNC; UNC-LH
- Flank angle: 60
- Tool material: solid carbide
- Shank: DIN 6535 HA with h6
- Through-coolant: yes
Product details
Technical Data
| Series | Master TM | |
| Thread size | 10-24 UNC | |
| Coating | TiAlN | |
| Thread type | UNC; UNC-LH | |
| Flank angle | 60 degrees | |
| Tool material | solid carbide | |
| Shank | DIN 6535 HA with h6 | |
| Through-coolant | yes | |
| Cutting direction | right-hand | |
| Thread pitch | 1,058 mm | |
| Threads per inch | 24 | |
| Nominal ⌀ DC | 3,55 mm | |
| Flute length Lc | 10,02 mm | |
| Shank length Ls | 36 mm | |
| Overall length L | 58 mm | |
| Shank ⌀ Ds | 6 mm | |
| Neck ⌀ D1 | 5,5 mm | |
| Programming value for countersink L1 | 10,91 mm | |
| No. of teeth Z | 4 | |
| Feed fz in steel < 750 N/mm2 | 0,03 mm | |
| Application for type of drilling | up to 2×D for blind holes; up to 2×D for through holes | |
| Spacing of the cutters | unequal spacing | |
| Countersink angle | 90 degrees | |
| Thread ⌀ | 4,83 mm | |
| Shank tolerance | h6 | |
| Number of clamping slots | 4 | |
| Colour ring | green | |
| Internal/external application | Internal | |
| Thread profile | Full profile | |
| Type of product | thread milling cutter |
Identification & Classification
| Article number | 139723 10-24 | |
| EAN / GTIN | 4062406058197 | |
| Manufacturer number | 139723 10-24 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Application Table
N
220
N
220
N
180
P
140
P
130
P
120
P
90
P
80
H
45
H
85
H
50
M
82
M
75
S
50
K
120
N
200
Description
Version:
Solid carbide thread milling cutters with irregular cutting edge spacing and an increased number of cutting edges. Due to the irregular cutting edge spacing they achieve very smooth running and long tool life.
Newly developed universal geometry and high-performance coating for use across a wide spectrum of materials.
Newly developed universal geometry and high-performance coating for use across a wide spectrum of materials.
- Significantly reduced vibration due to irregular cutting edge spacing.
- Increased number of cutting edges.
- New coating for optimum wear resistance.
- Corrected thread profile for avoidance of profile distortions.
Advantage:
Incorporating a countersink profile for a 90° countersink and thread milling in a single operation.
Application:
For UNC unified coarse threads ASME-B1.1.