{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
GARANT Master TM plain shank thread mill with countersink 2×D, TiAlN, G: G1/16
Article no.: 139715 G1/16
Article code:
- Thread type: G; G-LH
- Flank angle: 55
- Tool material: Solid carbide
- Shank: DIN 6535 HA to h6
- No. of teeth Z: 4
Product details
Technical Data
| Series | Master TM | |
| Thread size | G1/16 | |
| Coating | TiAlN | |
| Thread type | G; G-LH | |
| Flank angle | 55 degrees | |
| Tool material | Solid carbide | |
| Shank | DIN 6535 HA to h6 | |
| Thread pitch | 0,91 mm | |
| Threads per inch | 28 | |
| Nominal ⌀ DC | 6,2 mm | |
| Flute length Lc | 15,87 mm | |
| Shank length Ls | 40 mm | |
| Overall length L | 75 mm | |
| Shank ⌀ Ds | 10 mm | |
| Neck ⌀ D1 | 8,3 mm | |
| Programming value for countersink L1 | 16,88 mm | |
| No. of teeth Z | 4 | |
| Application for type of drilling | up to 2×D for blind holes; up to 2×D for through holes | |
| For use with external threads | up to 2×D for bolt threads | |
| Spacing of the cutters | unequal spacing | |
| Countersink angle | 90 degrees | |
| Feed fz in steel < 750 N/mm2 | 0,06 mm | |
| Thread profile | Full profile | |
| Number of clamping slots | 4 | |
| Colour ring | green | |
| Internal/external application | Internal | |
| Thread depth | 15,87 mm | |
| Type of product | thread milling cutter |
Identification & Classification
| Article number | 139715 G1/16 | |
| EAN / GTIN | 4045197956934 | |
| Manufacturer number | 139715 G1/16 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Application Table
N
220
N
220
N
180
P
140
P
130
P
120
P
90
P
80
H
45
H
85
H
50
M
82
M
75
S
50
K
120
N
200
Description
Version:
Solid carbide thread milling cutters with irregular cutting edge spacing and an increased number of cutting edges. Due to the irregular cutting edge spacing they achieve very smooth running and long tool life.
Newly developed universal geometry and high-performance coating for use across a wide spectrum of materials.
Newly developed universal geometry and high-performance coating for use across a wide spectrum of materials.
- Significantly reduced vibration due to irregular cutting edge spacing.
- Increased number of cutting edges.
- New coating for optimum wear resistance.
- Corrected thread profile for avoidance of profile distortions.
Advantage:
Incorporating a countersink profile for a 90° countersink and thread milling in a single operation.
Application:
For Whitworth parallel pipe threads DIN-ISO 228/1 (threads that do not form a seal within the connections). Suitable for internal and external threads.