{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Light duty bar clamp U-style LMU 100/50
Article no.: LMU10/5
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| Type of product | Clamp |
Identification & Classification
| Article number | LMU10/5 | |
| EAN / GTIN | 4008158032559 | |
| Manufacturer number | LMU10/5 | |
| L-Number | L80030 42 | |
| Manufacturer/responsible person | BESSEY Tool GmbH & Co. KG, Muehlenwieserstraße 40, 74321 BIETIGHEIM-BISSINGEN, Germany, www.bessey.de |
Description
Description:
- Clamping force up to 1,500 N
- Step‐over clamping
- Comes with two protective caps
- Small and easy to handle
- Light weight
Feature:
- Overhead: 50 mm
- Material / surface:
- Upper and lower part made of reinforced malleable cast iron, galvanized
- Galvanized steel rail
- Spindle with trapezoidal thread made of rolled steel, galvanized
- Wooden handle, water-based lacquer
- Pressure plate made of steel, cold pressed, galvanized
- Plastic protective caps
- Rail: 15x5 mm
- Wingspan: 100 mm
Advantage:
Step‐over clamping U‐shape
- The rail is made of quality steel drawn in a single piece for durability and strenght. The U‐shape of the rail enables step‐over clamping up to 20 mm so you can get to those hard‐to‐reach places.
- The sliding arm is made of die-cast zinc. It is light, stable and break-resistant.
- Particularly sensitive workpieces are effectively protected thanks to the protective caps. For all-round gentle clamping.
Application:
- Interior fittings
- DIY
- Furniture and joinery works
- Kitchen construction and shop fitting
- Rapid, gentle clamping
Note:
- Danger warnings:
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Care instructions:
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean the fluting on the rails with a steel brush
- Clean and oil the spindle regularly
- Clean and oil the pressure plate regularly